Brand: Bel-Art
Model: F18845-0020
Double-sided, compact polypropylene rack is perfect for use on the benchtop or in the freezer. One side accommodates 0.5ml microcentrifuge tubes while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 96 wells on each side keep tubes upright in an 8 x 12 array.•Fourteen rack colors assis..
Brand: Bel-Art
Model: F18843-0000
This two-tier polypropylene rack holds twenty 1.5ml microcentrifuge tubes in numbered wells.•Tubes are held with roughly 25mm (1") protruding above the rack surface for easy handling
•Steam autoclavable at 121ºC (250ºF)..
Brand: Bel-Art
Model: F18854-0003
Sturdy, stable polypropylene racks are made specifically for organizing and protecting thin-walled Nuclear Magnetic Resonance tubes.
•Hemispherical wells in lower deck cradle tubes
•End plate handles make transport easy
•Holds up to 72 tubes in a 6 x 12 array
•Chemical resistant and autoclavable
•Di..
Brand: Bel-Art
Model: F18838-0015
These white polypropylene racks are available in 2 popular grid sizes.
•Open sides make them adaptable for use in a tray of crushed ice
•Dimensions: 12.8 x 10.5 x 4.3cmH (5¼ x 4⅛ x 1¾")
•Steam autoclavable at 121ºC (250ºF)..
Brand: Bel-Art
Model: F18743-1016
These No-Wire™ racks fit neatly into round containers such as ice buckets and beakers, as well as desiccators. Choose from two sizes; the large rack is ideal for use in round ice buckets such as Magic Touch™ and the small rack fits perfectly in a 1000ml beaker.
•Special blend of autoclavable polypro..
Brand: Bel-Art
Model: F18741-0020
These No-Wire™ racks fit neatly into round containers such as ice buckets and beakers, as well as desiccators. Choose from two sizes; the large rack is ideal for use in round ice buckets such as Magic Touch™ and the small rack fits perfectly in a 1000ml beaker.
•Special blend of autoclavable polypro..
Brand: Bel-Art
Model: F18743-1020
These No-Wire™ racks fit neatly into round containers such as ice buckets and beakers, as well as desiccators. Choose from two sizes; the large rack is ideal for use in round ice buckets such as Magic Touch™ and the small rack fits perfectly in a 1000ml beaker.
•Special blend of autoclavable polypro..
Brand: Bel-Art
Model: F19929-0000
These micro sample tubes have a captive plug and will withstand the forces of a microcentrifuge. • Polypropylene
• Steam autoclavable at 121ºC (250ºF)..
Brand: Bel-Art
Model: H37080-0020
Securely holds 1.5ml microcentrifuge tubes in an 8 or 20 capacity disk for simultaneous vortexing.
• Tube contents are mixed by holding the shaft against the rubber pad of a vortexer
• Made of polypropylene with a 16.5cm (6½") long Delrin® shaft and 2.54cm (1") diameter ball handle..
Brand: Bel-Art
Model: F19856-0250
Holds large conical and round-bottom centrifuge tubes that cannot stand up by themselves (such as Falcon®, Corning®, Nunc®, and Kimble®). • Epoxy-coated steel wire rack is 10.2cm (4") high; has two levels of square grids to hold 6 tubes up to 250ml (60mm diameter)
• Heat-cured epoxy coating is unaff..
Brand: Bel-Art
Model: F19856-0500
This unique steel wire rack allows storage and transport of up to four (4) 500ml conical bottom centrifuge tubes.
• Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis
• Temperature range: -223ºC (-369ºF) to 121ºC (250ºF); autoclavable..
Brand: Bel-Art
Model: F18794-0001
Made of epoxy-coated steel wire, these racks hold up to thirty-six 50ml centrifuge tubes in holes 30mm square.
• Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis• Temperature range -223ºC (-369ºF) to 121ºC (250ºF); autoclavable..
Brand: Bel-Art
Model: F19858-0001
This black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack.
Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81")Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkaliTemperat..
Brand: Bel-Art
Model: F18794-0002
Made of epoxy-coated steel wire, these racks hold up to thirty-six 50ml centrifuge tubes in holes 30mm square.
• Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis
• Temperature range -223ºC (-369ºF) to 121ºC (250ºF); autoclavable..
Brand: Bel-Art
Model: F18794-0000
Made of epoxy-coated steel wire, these racks hold up to thirty-six 50ml centrifuge tubes in holes 30mm square.
• Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis
• Temperature range -223ºC (-369ºF) to 121ºC (250ºF); autoclavable..
Brand: Bel-Art
Model: F18722-0000
Epoxy-coated steel wire rack holds 15 conical bottom 15ml centrifuge tubes. Top and middle sections have 18mm square holes and are centered over rails in the base that hold the tips of the tubes.
•Generously spaced for easy handling
•Heat-cured epoxy coating is unaffected by organic solvents, salts,..
Brand: Bel-Art
Model: F18752-1150
Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning.
•Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis
•Will withstand a temperature range of -223ºC (-3..
Brand: Bel-Art
Model: F18753-0001
Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning.
•Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis
•Will withstand a temperature range of -223ºC (-3..
Brand: Bel-Art
Model: F18751-0160
Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning.
•Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis
•Will withstand a temperature range of -223ºC (-3..
Brand: Bel-Art
Model: F18750-0001
Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning.
•Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis
•Will withstand a temperature range of -223ºC (-3..