Laboratory space is always in high demand making the small footprint of the Scienceware® Lab-Aire® II Drying Racks a practical solution for drying and storing fragile, frequently used labware. Lab-Aire II Non-Electric Benchtop Dryers lets you place your dryer wherever it will be most convenient. A s..
Laboratory space is always in high demand making the small footprint of the Scienceware® Lab-Aire® II Drying Racks a practical solution for drying and storing fragile, frequently used labware. Lab-Aire II Non-Electric Benchtop Dryers lets you place your dryer wherever it will be most convenient. A s..
Laboratory space is always in high demand making the small footprint of the Scienceware® Lab-Aire® II Drying Racks a practical solution for drying and storing fragile, frequently used labware. Lab-Aire II Non-Electric Wallmount Dryers keep labware up off the bench and out of the way as it dries. Eas..
Laboratory space is always in high demand making the small footprint of the Scienceware® Lab-Aire® II Drying Racks a practical solution for drying and storing fragile, frequently used labware. Lab-Aire II Non-Electric Wallmount Dryers keep labware up off the bench and out of the way as it dries. Eas..
Small enough to hold in one hand and enough choices to accommodate most vials and small bottles.
▪Offered in 5 grid configurations
▪Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70")
▪Polypropylene; autoclavable..
Small enough to hold in one hand and enough choices to accommodate most vials and small bottles.
▪Offered in 5 grid configurations
▪Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70")
▪Polypropylene; autoclavable..
Small enough to hold in one hand and enough choices to accommodate most vials and small bottles.
▪Offered in 5 grid configurations
▪Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70")
▪Polypropylene; autoclavable..
Small enough to hold in one hand and enough choices to accommodate most vials and small bottles.
▪Offered in 5 grid configurations
▪Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70")
▪Polypropylene; autoclavable..
Small enough to hold in one hand and enough choices to accommodate most vials and small bottles.
▪Offered in 5 grid configurations
▪Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70")
▪Polypropylene; autoclavabl..
Ideal for rinsing, transport and storage of glassware.
• Polypropylene plastic baskets
• Three sizes available with or without lids
• Simply invert lidded baskets for easy draining
• Steam autoclavable at 121ºC (250ºF)..
Ideal for rinsing, transport and storage of glassware.• Polypropylene plastic baskets • Three sizes available with or without lids
• Simply invert lidded baskets for easy draining
• Steam autoclavable at 121ºC (250ºF)..
Ideal for rinsing, transport and storage of glassware.
• Polypropylene plastic baskets
• Three sizes available with or without lids
• Simply invert lidded baskets for easy draining
• Steam autoclavable at 121ºC (250ºF)..
Ideal for rinsing, transport and storage of glassware.
• Polypropylene plastic baskets
• Three sizes available with or without lids• Simply invert lidded baskets for easy draining• Steam autoclavable at 121ºC (250ºF)..
Ideal for rinsing, transport and storage of glassware.
• Polypropylene plastic baskets
• Three sizes available with or without lids
• Simply invert lidded baskets for easy draining
• Steam autoclavable at 121ºC (250ºF)..
For drying test tubes, beakers, flasks, and other labware, this stand has rubber tipped feet for non-skid use on a tabletop, or wire loops on the back for wall mounting.• Three rows of epoxy-coated hairpin-loop supports (14 in all) hold labware with 18mm I.D. necks or larger
• Top row has 12 straigh..
For use with 10mm stirring rods, the body is Teflon® PTFE with a Viton® O-ring.
• Comes complete with two Teflon® PTFE inserts with inside O-ring for fine adjustment of stirring rod tension
• Threaded polypropylene locking compression cap on top
• Extracting nut above the ground joint allows easy a..
Stopper has Teflon® PTFE body with Viton® O-ring.
• Polypropylene screw cap on top has an inside O-ring for depth adjustment of glass tubing
• Bottom inner joint has a threaded extracting nut for easy removal of adapter
• Not AutoclavableTEFLON® is a registered trademark of The Chemours Company FC ..
Stopper-Loc™ Nut allows stirrer bearing to be locked to outer ground joint when stirring viscous materials for long periods of time. _x000D_
• Complete with Stopper-Loc™ Nut and two Teflon® PTFE inserts_x000D_
• Replacement Teflon® PTFE insert with Viton® O-ring for 10mm Teflon® PTFE stirrer bearing..
Stopper-Loc™ Nut allows stirrer bearing to be locked to outer ground joint when stirring viscous materials for long periods of time.
• Complete with Stopper-Loc™ Nut and two Teflon® PTFE inserts
• Replacement Teflon® PTFE insert with Viton® O-ring for 10mm Teflon® PTFE stirrer bearings available
• ..