Sub-categories
Brand: Bel-Art
Model: F42065-0001
These acrylic desiccator cabinets can be used in refrigerators or at room temperature for dry storage of moisture-sensitive materials. • Fully removable, tray-like shelves have perforated bottoms and slide in/out on pre-set rails
• Door opens from right to left and is secured with a stainless steel ..
Brand: Bel-Art
Model: F42066-0001
These acrylic desiccator cabinets can be used in refrigerators or at room temperature for dry storage of moisture-sensitive materials.
• Fully removable, tray-like shelves have perforated bottoms and slide in/out on pre-set rails
• Door opens from right to left and is secured with a stainless steel..
Brand: Bel-Art
Model: H37888-0000
An excellent aspirator for use with Westergren or Wintrobe sedimentation tubes. Comes complete with an elastic cord for dedicating that pipettor to a specific reagent bottleTapered, silicone rubber seal provides an airtight fit on all size pipettesCan be opened, cleaned and steam autoclaved at ..
Brand: Bel-Art
Model: F10611-0032
Low-density polyethylene bottle comes with a water tight high-density polyethylene buttress screw cap with a 38/430 finish.
• Includes a ring between the cap and shoulder for holding a shrink wrapped cap sleeve..
Brand: Bel-Art
Model: F10611-0016
Low-density polyethylene bottle comes with a water tight high-density polyethylene buttress screw cap with a 38/430 finish.
• Includes a ring between the cap and shoulder for holding a shrink wrapped cap sleeve..
Brand: Bel-Art
Model: F13205-0001
This corrugated cardboard receptacle is perfect for containing biohazardous waste slated for incineration. When the box is full, pull the flap to a closed position and the entire unit can be placed in the incinerator.
• Tabs along the top edge keep a clear 0.038mm (1.5 mil) thick polypropylene bioha..
Brand: Bel-Art
Model: F13205-0002
This corrugated cardboard receptacle is perfect for containing biohazardous waste slated for incineration. When the box is full, pull the flap to a closed position and the entire unit can be placed in the incinerator.
• Tabs along the top edge keep a clear 0.038mm (1.5 mil) thick polypropylene bioha..
Brand: Bel-Art
Model: H14632-0010
These heavy bond grade filter paper discs are custom-sized to fit Table-Top Buchner funnels and have a thickness of 0.30mm.
• Made from creped white cellulose to improve porosity
• Flow rate: 90ml per minute
• Wet burst strength is greater than 68 KPa; able to retain particles as small as 3 microns..
Brand: Bel-Art
Model: H14632-0018
These heavy bond grade filter paper discs are custom-sized to fit Table-Top Buchner funnels and have a thickness of 0.30mm.
• Made from creped white cellulose to improve porosity• Flow rate: 90ml per minute
• Wet burst strength is greater than 68 KPa; able to retain particles as small as 3 microns..
Brand: Bel-Art
Model: H14632-0024
These heavy bond grade filter paper discs are custom-sized to fit Table-Top Buchner funnels and have a thickness of 0.30mm.
• Made from creped white cellulose to improve porosity• Flow rate: 90ml per minute
• Wet burst strength is greater than 68 KPa; able to retain particles as small as 3 microns..
Brand: Bel-Art
Model: H14632-0036
These heavy bond grade filter paper discs are custom-sized to fit Table-Top Buchner funnels and have a thickness of 0.30mm.
• Made from creped white cellulose to improve porosity• Flow rate: 90ml per minute• Wet burst strength is greater than 68 KPa; able to retain particles as small as 3 microns..
Brand: Bel-Art
Model: F18513-4640
Designed specifically for 5ml centrifuge tubes, including Eppendorf* brand, this rack will also accommodate other tubes with a diameter of 13-16mm.
▪Made of durable and corrosion resistant white polypropylene plastic
▪End plates have handles for easy transport and stacking
▪Top shelf height: 3.4cm (..
Brand: Bel-Art
Model: F19713-0001
Ensure one-way directional flow in vacuum lines with these polyethylene plastic check valves.
• Operate positively; instantly blocks flow if direction changes
• Built-in arrows indicate direction of free flow
• Neoprene disk, no metal
• Maximum operating pressure is 20psi..
Brand: Bel-Art
Model: F19713-0002
Ensure one-way directional flow in vacuum lines with these polyethylene plastic check valves.
• Operate positively; instantly blocks flow if direction changes
• Built-in arrows indicate direction of free flow
• Neoprene disk, no metal• Maximum operating pressure is 20psi..
Brand: Bel-Art
Model: H19716-0000
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..
Brand: Bel-Art
Model: H19715-0000
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..
Brand: Bel-Art
Model: H19717-0000
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.
• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..
Brand: Bel-Art
Model: H17871-0000
Great for storing small quantities of liquids or solids, these heavy-walled, injection molded polyethylene jars have even been used to transport dust samples from the moon.
• Easy-to-clean
• Screw cap design features leak-proof inner seal..
Brand: Bel-Art
Model: H17875-0000
Great for storing small quantities of liquids or solids, these heavy-walled, injection molded polyethylene jars have even been used to transport dust samples from the moon.
• Easy-to-clean
• Screw cap design features leak-proof inner seal..
Brand: Bel-Art
Model: H17876-0000
Great for storing small quantities of liquids or solids, these heavy-walled, injection molded polyethylene jars have even been used to transport dust samples from the moon.
• Easy-to-clean• Screw cap design features leak-proof inner seal..