Sub-categories
Brand: Wilmad
Model: WG-1207-J10
Economy Tube Washers/Cleaners for NMR and EPR Sample Tubes
After fitting the washer to a filter flask, an inverted sample tube is inserted into the washer and solvent is introduced into the reservoir using a series of wash bottles.
You can perform numerous wash steps and finish by pulling air throug..
Brand: Wilmad
Model: WG-1207-J5
Economy Tube Washers/Cleaners for NMR and EPR Sample Tubes
After fitting the washer to a filter flask, an inverted sample tube is inserted into the washer and solvent is introduced into the reservoir using a series of wash bottles.
You can perform numerous wash steps and finish by pulling air throug..
Brand: Wilmad
Model: WG-1207-J5-8
Economy Tube Washers/Cleaners for NMR and EPR Sample Tubes
After fitting the washer to a filter flask, an inverted sample tube is inserted into the washer and solvent is introduced into the reservoir using a series of wash bottles.
You can perform numerous wash steps and finish by pulling air throug..
Brand: Wilmad
Model: WG-1209-1
Multi-Tube Jet Solvent NMR/EPR Tube Washer/Dryer (2nd Generation)
Wilmad’s 2nd generation Multi-Tube Jet Solvent Washer/Dryer is recommended for research labs that routinely clean NMR and EPR tubes; a single unit can accommodate up to 5 tubes (3, 4 and 5 mm OD) at once.
When an inverted tube is ins..
Brand: Wilmad
Model: WG-1209-J1
Multi-Tube Jet Solvent NMR/EPR Tube Washer/Dryer (2nd Generation)
Wilmad’s 2nd generation Multi-Tube Jet Solvent Washer/Dryer is recommended for research labs that routinely clean NMR and EPR tubes; a single unit can accommodate up to 5 tubes (3, 4 and 5 mm OD) at once.
When an inverted tube is ins..
Brand: Wilmad
Model: WG-1209-J2
Multi-Tube Jet Solvent NMR/EPR Tube Washer/Dryer (2nd Generation)
Wilmad’s 2nd generation Multi-Tube Jet Solvent Washer/Dryer is recommended for research labs that routinely clean NMR and EPR tubes; a single unit can accommodate up to 5 tubes (3, 4 and 5 mm OD) at once.
When an inverted tube is ins..
Brand: Wilmad
Model: WG-1264-10
NMR/EPR Tube Caps – PTFE
Our PTFE NMR/EPR Tube Caps are machined to exact specifications with smaller gyroradius and more homogeneous mass distribution than disposable caps providing better spinning stability.
They are recommended for experiments at high – ultra high field and those using Chloroform..
Brand: Wilmad
Model: WG-1264-3
NMR/EPR Tube Caps – PTFE
Our PTFE NMR/EPR Tube Caps are machined to exact specifications with smaller gyroradius and more homogeneous mass distribution than disposable caps providing better spinning stability.
They are recommended for experiments at high – ultra high field and those using Chloroform..
Brand: Wilmad
Model: WG-1264-4
NMR/EPR Tube Caps – PTFE
Our PTFE NMR/EPR Tube Caps are machined to exact specifications with smaller gyroradius and more homogeneous mass distribution than disposable caps providing better spinning stability.
They are recommended for experiments at high – ultra high field and those using Chloroform..
Brand: Wilmad
Model: WG-1264-5
NMR/EPR Tube Caps – PTFE
Our PTFE NMR/EPR Tube Caps are machined to exact specifications with smaller gyroradius and more homogeneous mass distribution than disposable caps providing better spinning stability.
They are recommended for experiments at high – ultra high field and those using Chloroform..
Brand: Wilmad
Model: WG-1265-100
NMR/EPR Tube Caps – PTFE
Our PTFE NMR/EPR Tube Caps are machined to exact specifications with smaller gyroradius and more homogeneous mass distribution than disposable caps providing better spinning stability.
They are recommended for experiments at high – ultra high field and those using Chloroform..
Brand: Wilmad
Model: WG-3889-100
NMR/EPR Tube Caps – Gas-Tight
Our Gas-Tight Tube Caps are ideal for experiments that require an air-tight environment under vacuum or low pressure less than 1 bar.
Use with our Medium-Walled and Heavy-Walled NMR tubes for better seal and robustness in variable temperature experiments.
Serum Caps all..
Brand: Wilmad
Model: WG-3891-100
Septa, NMR, White Rubber
Our White Rubber Septa seals to 5mm O.D. thin wall Precision NMR tubes.
Designed to maintain excellent glass to rubber contact; inject your sample or reactant into the NMR tube.
Great for Air-Sensitive samples, Catalytic studies and Titration experiments.
They are manufactur..
Brand: Wilmad
Model: WG-6192
NMR/EPR Tube Carrier
Try our handy pocket NMR/EPR tube carrier; holds one 5mm O.D., 7 inch length NMR/EPR tube.
Pack of 3 white holders.
Features a pocket clip that keeps it secure.
Made from unbreakable polymer material with a snap-on cap.
Protection is provided for the sample and lab personnel du..
Brand: Wilmad
Model: WG-7200-1
Universal Solvent Jet Washers for NMR and EPR Sample Tubes
The Universal Solvent Jet NMR Tube Washer can be used for any length NMR sample tube by a simple adjustment of the flexible PTFE tubing.
By loosening and retightening the fitting on the assembled washer head, the PTFE tubing that extends int..
Brand: Wilmad
Model: WG-7200-J1
Universal Solvent Jet Washers for NMR and EPR Sample Tubes
The Universal Solvent Jet NMR Tube Washer can be used for any length NMR sample tube by a simple adjustment of the flexible PTFE tubing.
By loosening and retightening the fitting on the assembled washer head, the PTFE tubing that extends int..
Brand: Wilmad
Model: WG-804-Q
Room Temperature Flow Aqueous Cells
Continuous flow is a powerful tool to study free radical intermediates with short life-time at steady state.
Wilmad-LabGlass manufactures two types of flow cells: room and variable temperature for such applications.
The length of the flow tube is 130 mm before r..
Brand: Wilmad
Model: WG-805
Vortex Plugs and Positioning Rods
Plugs are made of PTFE and chemcially resistent to most orgianic compound.
Recommended for sample positioning inside the NMR tube.
WG-504 is a stainless steel positioning rod and recommend to use with WG-805, WG-805J, WG-805K, WG-805D, WG-805A, WG-805A-3 and WG-80..
Brand: Wilmad
Model: WG-806-A-Q
Tissue Sample Cells
•EPR Tissue Sample Cells are used for viscous samples such as polymers and wet tissue.
•All cells, except WG-807-Q, include a 0.5 mm deep well for thick samples.
•The sample is placed between the plates.
•EPR Tissue Sample Cells come with two support rods.
•Each cell includes..
Brand: Wilmad
Model: WG-806-B-Q
Tissue Sample Cells
•EPR Tissue Sample Cells are used for viscous samples such as polymers and wet tissue.
•All cells, except WG-807-Q, include a 0.5 mm deep well for thick samples.
•The sample is placed between the plates.
•EPR Tissue Sample Cells come with two support rods.
•Each cell includes..