Brand: Bel-Art
Model: H18978-0000
These epoxy coated steel wire racks hold 100mm x 20mm plastic Petri dishes and are easily loaded and emptied from the top.
• Wide front openings permit easy access but prevent dishes from sliding out
• Not suitable for glass Petri dishes
• Epoxy coated steel wire is chemical and corrosion resistant..
Brand: Bel-Art
Model: H18979-0000
These epoxy coated steel wire racks hold 100mm x 20mm plastic Petri dishes and are easily loaded and emptied from the top.
• Wide front openings permit easy access but prevent dishes from sliding out
• Not suitable for glass Petri dishes
• Epoxy coated steel wire is chemical and corrosion resistant..
Brand: Bel-Art
Model: H18962-0001
Store pipettors while protecting pipettor tips in these epoxy-coated aluminum racks that provide quick, easy access for more efficient work.
• Holds up to 10 round shape pipettors such as Finnpipette®, Socorex®, Eppendorf® and other popular brands; two end holes fit Pipette-Aid® pipette fillers• Tw..
Brand: Bel-Art
Model: F16969-0012
These racks have 12 places (3 x 4 rows) for 300ml Biological Oxygen Demand Bottles.
•Stackable for storage or refrigeration allowing 16.7cm (6⁹/₁₆") between racks
•Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F)..
Brand: Bel-Art
Model: F16964-0006
Bel-Art Poxygrid Hybridization Bottle Rack for 40mm Diameter Bottles; 6 Places, 5⅜ x 7¹³⁄₁₆ x 5⅛ in.
Heavy-duty rack protects your expensive bottles keeping them from rolling, tipping and striking against one another. Holds 150mm and 300mm long bottles with ample space in between to allow for the screw cap diameter and provide convenient handling.
• Epoxy-coated steel rods provide durability and e..
Brand: Bel-Art
Model: H18962-0000
Store pipettors while protecting pipettor tips in these epoxy-coated aluminum racks that provide quick, easy access for more efficient work.• Holds up to 10 round shape pipettors such as Finnpipette®, Socorex®, Eppendorf® and other popular brands; two end holes fit Pipette-Aid® pipette fillers
• Two..
Brand: Bel-Art
Model: F18942-0000
For safe, convenient storage of Pasteur pipettes or transfer pipettes. Pipette cans not included.• Individual compartments store up to four 5.7 x 5.7cm (2¼ x 2¼") pipette sterilization cans
• Sits flat on benchtop; supports pipettes at an angle to allow for easy selection and use
• Epoxy coated stee..
Brand: Bel-Art
Model: F18979-0006
The epoxy-coated steel wire Petri Dish Mini Rack helps keep benchtops neat and organized.
•Holds six 100mm Petri dishes with lids
•Ideal for lab transport and incubation of dishes
•Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F)..
a
Brand: Bel-Art
Model: F18794-0003
Epoxy coated steel wire holder is chemical and corrosion resistant.
• Supports a single 50ml conical tube at bottom and half height locations
• Durable and economical
• Autoclavable..
c
Brand: Bel-Art
Model: F18757-0001
Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning.
▪Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis ▪Will withstand a temperature range of -223ºC (-..
c
Brand: Bel-Art
Model: F18763-0160
Chemical and corrosion-resistant steel wire test tube rack is coated with heat-cured epoxy for long life and easy cleaning.
▪Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis
▪Temperature range: -223°C (-369°F) to 121°C (250°F); autoclavable
▪All racks have squ..
Brand: Bel-Art
Model: F18788-1301
Excellent space-savers for use in water baths, laminar flow hoods, fume hoods or any place where space is limited. Choice of three colors: orange for biohazard warning, green and blue for general lab use.
▪Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy
▪Unaffect..
a
Brand: Bel-Art
Model: F18745-0045
This innovative, split-frame rack holds up to two different size tubes in the same rack and allows users to quickly switch grids to hold other sizes as needed. Each rack frame includes a set of grids in one size. Grid sets in alternate sizes can be purchased separately.• 10mm to 30mm diameter test t..
Brand: Bel-Art
Model: F18212-0000
Offers on/off and fine control so accurate that it replaces stopcocks in many applications. • Can be installed without disconnecting tubing or interrupting operation
• Accepts flexible tubing up to 14mm (½") O.D• Molded of Acetal plastic; autoclavable• Resistant to acids, alkalis and organic solvent..
Brand: Bel-Art
Model: H18354-0000
Firmly holds test-tubes, burettes and other labware in place• Spring aciton, stainless steel jaws have a flat wing-head screw for tightening• Jaws are covered with rubber tubing for increased friction and a soft grip• Opening range of 0 to 25mm (1")• Overall clamp length: 22cm (9")..
Brand: Bel-Art
Model: H18350-0000
This open-sided stainless steel bosshead clamp accepts rods up to 13mm (½") diameter.
• Holds rods at right angles to one another
• Secures rods with flat wing-head clamping screws..
Brand: Bel-Art
Model: F18981-0001
This polypropylene rack holds up to 25 thermometers in correct vertical position to prevent separation which may occur when thermometers are stored improperly.
•Top and middle plate hole diameters: 7.9mm (⁵⁄₁₆")
•Bottom plate has 3.2mm (¹/₈") diameter drain holes
•Distance between top and bottom pla..
Brand: Bel-Art
Model: F18235-0000
This polypropylene plastic clip holds flexible tubing steady and fits securely onto the edge of beakers or pitchers up to ¼" thick.
• 5.1cm (2") long arm has a hole to accept tubing up to 9.5mm (⅜") O.D.
• Autoclavable..
Brand: Bel-Art
Model: H18977-0000
This polypropylene rack holds 143 vacuum-type syringe tubes: 80 tubes 12.7mm (¹/₂") O.D. and 63 tubes 16mm (⁵/₈") O.D. up to 102mm (4") long.
•Tubes are suspended in channels by colored stoppers providing instant visual identification
•One or two channels may be left open for stacking blood samples ..
Brand: Bel-Art
Model: F18391-0001
Supports gradient makers, hot plates, flasks, beakers, baths and other lab items up to 6.8kg (15lb). Molded of strong polycarbonate and assembled with no metal parts, the plastic jack is electrically non-conductive, can be immersed in a bath or used in corrosive environments and is steam autoclavabl..