Brand: Bel-Art
Model: F18933-0011
Laboratory space is always in high demand making the small footprint of the Scienceware® Lab-Aire® II Drying Racks a practical solution for drying and storing fragile, frequently used labware. Lab-Aire II Non-Electric Benchtop Dryers lets you place your dryer wherever it will be most convenient. A s..
Brand: Bel-Art
Model: F18933-0014
Laboratory space is always in high demand making the small footprint of the Scienceware® Lab-Aire® II Drying Racks a practical solution for drying and storing fragile, frequently used labware. Lab-Aire II Non-Electric Wallmount Dryers keep labware up off the bench and out of the way as it dries. Eas..
Brand: Bel-Art
Model: F18933-0013
Laboratory space is always in high demand making the small footprint of the Scienceware® Lab-Aire® II Drying Racks a practical solution for drying and storing fragile, frequently used labware. Lab-Aire II Non-Electric Wallmount Dryers keep labware up off the bench and out of the way as it dries. Eas..
a
Brand: Bel-Art
Model: F18514-0013
Small enough to hold in one hand and enough choices to accommodate most vials and small bottles.
▪Offered in 5 grid configurations
▪Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70")
▪Polypropylene; autoclavable..
a
Brand: Bel-Art
Model: F18514-0016
Small enough to hold in one hand and enough choices to accommodate most vials and small bottles.
▪Offered in 5 grid configurations
▪Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70")
▪Polypropylene; autoclavable..
a
Brand: Bel-Art
Model: F18514-0020
Small enough to hold in one hand and enough choices to accommodate most vials and small bottles.
▪Offered in 5 grid configurations
▪Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70")
▪Polypropylene; autoclavable..
a
Brand: Bel-Art
Model: F18514-0025
Small enough to hold in one hand and enough choices to accommodate most vials and small bottles.
▪Offered in 5 grid configurations
▪Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70")
▪Polypropylene; autoclavable..
a
Brand: Bel-Art
Model: F18514-0030
Small enough to hold in one hand and enough choices to accommodate most vials and small bottles.
▪Offered in 5 grid configurations
▪Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70")
▪Polypropylene; autoclavabl..
a
Brand: Bel-Art
Model: F18520-0000
All-polypropylene rack provides gentle no-scratch support for fragile and expensive spectrophotometer cuvettes.
▪Holds forty-two 10mm light path cuvettes
▪6 x 7 row layout
▪Steam autoclavable at 121ºC (250ºF)..
a
Brand: Bel-Art
Model: F18737-0010
Ideal for rinsing, transport and storage of glassware.
• Polypropylene plastic baskets
• Three sizes available with or without lids
• Simply invert lidded baskets for easy draining
• Steam autoclavable at 121ºC (250ºF)..
a
Brand: Bel-Art
Model: F18738-0000
Ideal for rinsing, transport and storage of glassware.• Polypropylene plastic baskets • Three sizes available with or without lids
• Simply invert lidded baskets for easy draining
• Steam autoclavable at 121ºC (250ºF)..
a
Brand: Bel-Art
Model: F18738-0010
Ideal for rinsing, transport and storage of glassware.
• Polypropylene plastic baskets
• Three sizes available with or without lids
• Simply invert lidded baskets for easy draining
• Steam autoclavable at 121ºC (250ºF)..
a
Brand: Bel-Art
Model: F18739-0010
Ideal for rinsing, transport and storage of glassware.
• Polypropylene plastic baskets
• Three sizes available with or without lids
• Simply invert lidded baskets for easy draining
• Steam autoclavable at 121ºC (250ºF)..
Brand: Bel-Art
Model: H18805-0000
For drying test tubes, beakers, flasks, and other labware, this stand has rubber tipped feet for non-skid use on a tabletop, or wire loops on the back for wall mounting.• Three rows of epoxy-coated hairpin-loop supports (14 in all) hold labware with 18mm I.D. necks or larger
• Top row has 12 straigh..
Brand: Bel-Art
Model: F20320-1660
For use with 10mm stirring rods, the body is Teflon® PTFE with a Viton® O-ring.
• Comes complete with two Teflon® PTFE inserts with inside O-ring for fine adjustment of stirring rod tension
• Threaded polypropylene locking compression cap on top
• Extracting nut above the ground joint allows easy a..
Brand: Bel-Art
Model: F20311-1718
Stopper has Teflon® PTFE body with Viton® O-ring.
• Polypropylene screw cap on top has an inside O-ring for depth adjustment of glass tubing
• Bottom inner joint has a threaded extracting nut for easy removal of adapter
• Not AutoclavableTEFLON® is a registered trademark of The Chemours Company FC ..
Brand: Bel-Art
Model: F20320-1661
Stopper-Loc™ Nut allows stirrer bearing to be locked to outer ground joint when stirring viscous materials for long periods of time. _x000D_
• Complete with Stopper-Loc™ Nut and two Teflon® PTFE inserts_x000D_
• Replacement Teflon® PTFE insert with Viton® O-ring for 10mm Teflon® PTFE stirrer bearing..
Brand: Bel-Art
Model: F20320-1662
Stopper-Loc™ Nut allows stirrer bearing to be locked to outer ground joint when stirring viscous materials for long periods of time.
• Complete with Stopper-Loc™ Nut and two Teflon® PTFE inserts
• Replacement Teflon® PTFE insert with Viton® O-ring for 10mm Teflon® PTFE stirrer bearings available
• ..
Brand: Bel-Art
Model: F20309-1680
Teflon® PTFE body with Viton® O-ring for air tight vacuum work (Size 10/18 adapter does not have a body O-ring).
• Adapter has a threaded polypropylene screw cap on top with an inside O-ring for depth adjustment of 6-7mm for straight stem thermometers, glass tubing and other items
• Rotating the ex..
Brand: Bel-Art
Model: F20309-1710
Teflon® PTFE body with Viton® O-ring for air tight vacuum work (Size 10/18 adapter does not have a body O-ring).
• Adapter has a threaded polypropylene screw cap on top with an inside O-ring for depth adjustment of 6-7mm for straight stem thermometers, glass tubing and other items
• Rotating the ex..