Brand: Wilmad
Model: 6030-02-BNC
Combination pH Electrode
•For use in 5mm thin walled NMR tubes up to 8 inches in length.
•Glass probe dimensions are 3 OD x 180 mm L.
•pH Range: 0-14
•Temperature Range: 0-70° C
•Resolution: 0.02 pH
•UnitsSodium Error: 0.1 at pH 12
•Resistance at 20° C: 100-1000 megaohms
•Reproducibility: 99% wit..
Brand: Wilmad
Model: B-PEEK-10
Spinner Turbines for Bruker® Spectrometers, Variable Temperature
•Causes less probe insert damage by better insert sample control.
•Tachometer strip now with foil protection for improved life span.
•Longer upper barrel stabilizer easily identified by 3mm yellow band.
•Variable temperature operati..
Brand: Wilmad
Model: B-PEEK-3-NS
Spinner Turbines for Bruker® Spectrometers
•Cost effective compared to the full VT version for sample changers
•Allows a portion of the VT air to pass straight past the sample inside the spinner turbine therefore reducing VT gradients and micro sonic flutter due to a high VT flow
•Includes high temp..
Brand: Wilmad
Model: B-PEEK-5
Spinner Turbines for Bruker® Spectrometers, Variable Temperature
•Causes less probe insert damage by better insert sample control.
•Tachometer strip now with foil protection for improved life span.
•Longer upper barrel stabilizer easily identified by 3mm yellow band.
•Variable temperature operati..
Brand: Wilmad
Model: STB-5
Spinner Turbines for Bruker® Spectrometers Room Temperature
•Causes less probe insert damage by better insert sample control.
•Tachometer strip now with foil protection for improved life span.
•Longer upper barrel stabilizer easily identified by 3mm yellow band.
•Limited VT operation possible of ..
Brand: Wilmad
Model: WG-1207-5
Economy Tube Washers/Cleaners for NMR and EPR Sample Tubes
After fitting the washer to a filter flask, an inverted sample tube is inserted into the washer and solvent is introduced into the reservoir using a series of wash bottles.
You can perform numerous wash steps and finish by pulling air throug..
Brand: Wilmad
Model: WG-1207-J10
Economy Tube Washers/Cleaners for NMR and EPR Sample Tubes
After fitting the washer to a filter flask, an inverted sample tube is inserted into the washer and solvent is introduced into the reservoir using a series of wash bottles.
You can perform numerous wash steps and finish by pulling air throug..
Brand: Wilmad
Model: WG-1207-J5
Economy Tube Washers/Cleaners for NMR and EPR Sample Tubes
After fitting the washer to a filter flask, an inverted sample tube is inserted into the washer and solvent is introduced into the reservoir using a series of wash bottles.
You can perform numerous wash steps and finish by pulling air throug..
Brand: Wilmad
Model: WG-1207-J5-8
Economy Tube Washers/Cleaners for NMR and EPR Sample Tubes
After fitting the washer to a filter flask, an inverted sample tube is inserted into the washer and solvent is introduced into the reservoir using a series of wash bottles.
You can perform numerous wash steps and finish by pulling air throug..
Brand: Wilmad
Model: WG-1209-1
Multi-Tube Jet Solvent NMR/EPR Tube Washer/Dryer (2nd Generation)
Wilmad’s 2nd generation Multi-Tube Jet Solvent Washer/Dryer is recommended for research labs that routinely clean NMR and EPR tubes; a single unit can accommodate up to 5 tubes (3, 4 and 5 mm OD) at once.
When an inverted tube is ins..
Brand: Wilmad
Model: WG-1209-J1
Multi-Tube Jet Solvent NMR/EPR Tube Washer/Dryer (2nd Generation)
Wilmad’s 2nd generation Multi-Tube Jet Solvent Washer/Dryer is recommended for research labs that routinely clean NMR and EPR tubes; a single unit can accommodate up to 5 tubes (3, 4 and 5 mm OD) at once.
When an inverted tube is ins..
Brand: Wilmad
Model: WG-1209-J2
Multi-Tube Jet Solvent NMR/EPR Tube Washer/Dryer (2nd Generation)
Wilmad’s 2nd generation Multi-Tube Jet Solvent Washer/Dryer is recommended for research labs that routinely clean NMR and EPR tubes; a single unit can accommodate up to 5 tubes (3, 4 and 5 mm OD) at once.
When an inverted tube is ins..
Brand: Wilmad
Model: WG-1264-10
NMR/EPR Tube Caps – PTFE
Our PTFE NMR/EPR Tube Caps are machined to exact specifications with smaller gyroradius and more homogeneous mass distribution than disposable caps providing better spinning stability.
They are recommended for experiments at high – ultra high field and those using Chloroform..
Brand: Wilmad
Model: WG-1264-3
NMR/EPR Tube Caps – PTFE
Our PTFE NMR/EPR Tube Caps are machined to exact specifications with smaller gyroradius and more homogeneous mass distribution than disposable caps providing better spinning stability.
They are recommended for experiments at high – ultra high field and those using Chloroform..
Brand: Wilmad
Model: WG-1264-4
NMR/EPR Tube Caps – PTFE
Our PTFE NMR/EPR Tube Caps are machined to exact specifications with smaller gyroradius and more homogeneous mass distribution than disposable caps providing better spinning stability.
They are recommended for experiments at high – ultra high field and those using Chloroform..
Brand: Wilmad
Model: WG-1264-5
NMR/EPR Tube Caps – PTFE
Our PTFE NMR/EPR Tube Caps are machined to exact specifications with smaller gyroradius and more homogeneous mass distribution than disposable caps providing better spinning stability.
They are recommended for experiments at high – ultra high field and those using Chloroform..
Brand: Wilmad
Model: WG-1265-100
NMR/EPR Tube Caps – PTFE
Our PTFE NMR/EPR Tube Caps are machined to exact specifications with smaller gyroradius and more homogeneous mass distribution than disposable caps providing better spinning stability.
They are recommended for experiments at high – ultra high field and those using Chloroform..
Brand: Wilmad
Model: WG-3889-100
NMR/EPR Tube Caps – Gas-Tight
Our Gas-Tight Tube Caps are ideal for experiments that require an air-tight environment under vacuum or low pressure less than 1 bar.
Use with our Medium-Walled and Heavy-Walled NMR tubes for better seal and robustness in variable temperature experiments.
Serum Caps all..
Brand: Wilmad
Model: WG-3891-100
Septa, NMR, White Rubber
Our White Rubber Septa seals to 5mm O.D. thin wall Precision NMR tubes.
Designed to maintain excellent glass to rubber contact; inject your sample or reactant into the NMR tube.
Great for Air-Sensitive samples, Catalytic studies and Titration experiments.
They are manufactur..
Brand: Wilmad
Model: WG-6192
NMR/EPR Tube Carrier
Try our handy pocket NMR/EPR tube carrier; holds one 5mm O.D., 7 inch length NMR/EPR tube.
Pack of 3 white holders.
Features a pocket clip that keeps it secure.
Made from unbreakable polymer material with a snap-on cap.
Protection is provided for the sample and lab personnel du..