Search Criteria
Products meeting the search criteria
c
Brand: Bel-Art
Model: F18851-0016
100-place polypropylene storage boxes provide compact, safe storage for 0.5, 1.5 and 2.0ml tubes and cryo vials. Unlike cardboard boxes they are autoclavable and will not break down if exposed to moisture or heavy use. Boxes measure: 15.4 x 14.3 x 5.6cmH (6 x 5.7 x 2.2”H) and 14.3 x 14.3 x 5.6cmH (5..
Brand: Bel-Art
Model: F18991-0000
Safely transport, incubate and store Petri dishes and contact plates, and helps to streamline benchtop sample processing.
• Configured in 6 columns with bottom access slots for easy removal of plates
• Center divider with built-in handle has ample space for labeling
• Up to four racks can be stacke..
Brand: Bel-Art
Model: F18516-0000
These two tier racks support cuvettes with a minimum of physical contact, greatly reducing the chance of damage.
•Only the corners of the cuvettes touch the racks
•Accommodate 12 cuvettes of 10mm light path
•Will not scratch quartz cuvettes
•F18516-0787 features Stack Rack™ interlocking end plates f..
Brand: Bel-Art
Model: F18516-0787
These two tier racks support cuvettes with a minimum of physical contact, greatly reducing the chance of damage.
•Only the corners of the cuvettes touch the racks
•Accommodate 12 cuvettes of 10mm light path
•Will not scratch quartz cuvettes•F18516-0787 features Stack Rack™ interlocking end plates fo..
Brand: Bel-Art
Model: H18910-0102
This black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack.
•Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81")
•Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis
•Temp..
Brand: Bel-Art
Model: F18855-0000
These heavy-duty 3 tier test tube racks have hand grips in the end plates for easy transport.
•Stackable and compact
•Base tier has rounded wells with drain holes
•Top tier has lettered and numbered rows
•Polypropylene; steam autoclavable at 121ºC (250ºF)..
a
Brand: Bel-Art
Model: F18745-0099
Round holes with tight tolerances hold 13mm tubes firmly for accurate processing reducing lost samples and potential damage to instruments. Increased efficiency is achieved by using the numbered locations for programming, resulting in higher throughput.
Designed for automated liquid handling systems..
a
Brand: Bel-Art
Model: F18745-0023
Round holes with tight tolerances hold 13mm tubes firmly for accurate processing reducing lost samples and potential damage to instruments. Increased efficiency is achieved by using the numbered locations for programming, resulting in higher throughput.
▪Designed for automated liquid handling syste..
Brand: Bel-Art
Model: H18901-0000
These two piece racks include a lower tray to hold water or ice flakes. Choose from two sizes to best suit your needs. • Small rack holds 105, 400 μL microcentrifuge tubes or other tubes with a diameter of 8mm and is stackable.
• Large rack holds 120, 1.5ml microcentrifuge tubes or other tubes wit..
a
Brand: Bel-Art
Model: F18514-0013
Small enough to hold in one hand and enough choices to accommodate most vials and small bottles.
▪Offered in 5 grid configurations
▪Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70")
▪Polypropylene; autoclavable..
a
Brand: Bel-Art
Model: F18520-0000
All-polypropylene rack provides gentle no-scratch support for fragile and expensive spectrophotometer cuvettes.
▪Holds forty-two 10mm light path cuvettes
▪6 x 7 row layout
▪Steam autoclavable at 121ºC (250ºF)..
Brand: Bel-Art
Model: F18749-0000
Retainer fingers hold tubes firmly in the rack plates with no fear of dislodging, making them perfect for both decanting and water bath work.
▪Fingers allow simultaneous decanting to save valuable time
▪Specially formulized plastic allows the rack to submerge in water baths ▪Fingers secure tubes w..
a
Brand: Bel-Art
Model: F18748-0013
Compact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods.
▪Available in 5 grid sizes to accommodate the full range of laboratory test tubes
▪Steam autoclavable at 121ºC (250ºF)
▪Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")..
Brand: Bel-Art_Special Deal
Model: F18748-0013
Compact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods.
▪Available in 5 grid sizes to accommodate the full range of laboratory test tubes
▪Steam autoclavable at 121ºC (250ºF)
▪Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")..
a
Brand: Bel-Art
Model: F18747-0000
A great alternative to wire racks, with price and space saving advantages over other plastic racks. Dimensions for all racks are 24.6 x 10.4 x 6.4cm high (9.7 x 4.1 x 2.5”) and they assemble in seconds.
▪Made of a special blend of autoclavable polypropylene; will sink in a water bath and maintain t..
Brand: Bel-Art_Special Deal
Model: F18747-0000
A great alternative to wire racks, with price and space saving advantages over other plastic racks. Dimensions for all racks are 24.6 x 10.4 x 6.4cm high (9.7 x 4.1 x 2.5”) and they assemble in seconds.
▪Made of a special blend of autoclavable polypropylene; will sink in a water bath and maintain t..
a
Brand: Bel-Art
Model: F18746-0000
A great alternative to wire racks, with price and space saving advantages over other plastic racks. Dimensions for all racks are 24.6 x 10.4 x 6.4cm high (9.7 x 4.1 x 2.5”) and they assemble in seconds.
▪Made of a special blend of autoclavable polypropylene; will sink in a water bath and maintain t..
Brand: Bel-Art_Special Deal
Model: F18746-0000
A great alternative to wire racks, with price and space saving advantages over other plastic racks. Dimensions for all racks are 24.6 x 10.4 x 6.4cm high (9.7 x 4.1 x 2.5”) and they assemble in seconds.
▪Made of a special blend of autoclavable polypropylene; will sink in a water bath and maintain t..
a
Brand: Bel-Art
Model: F18745-0000
A great alternative to wire racks, with price and space saving advantages over other plastic racks. Dimensions for all racks are 24.6 x 10.4 x 6.4cm high (9.7 x 4.1 x 2.5”) and they assemble in seconds.
▪ Made of a special blend of autoclavable polypropylene; will sink in a water bath and maintain t..
Brand: Bel-Art
Model: H18978-0000
These epoxy coated steel wire racks hold 100mm x 20mm plastic Petri dishes and are easily loaded and emptied from the top.
• Wide front openings permit easy access but prevent dishes from sliding out
• Not suitable for glass Petri dishes
• Epoxy coated steel wire is chemical and corrosion resistant..