Search Criteria
Products meeting the search criteria
Brand: Bel-Art
Model: H44557-0000
With these handy files near your microscope, slides are always separated, visible and orderly.
• Vacuum-formed polystyrene 12-place slide holder
• Allows slides to project over the rack’s edge for easy handling..
Brand: Bel-Art
Model: F13472-0000
Write-On™ Label Tape Dispensers provide a smooth writing surface, making labeling easy and fast. When marked tape is advanced and cut off on the serrated edge, a fresh length of label tape is positioned on the writing platform.
• Various width and color tape rolls can be mixed together on the spindl..
Brand: Bel-Art
Model: F24975-0000
This 9.5mm (3/8") clear acrylic shield provides protection from beta emitters and accidental splashes from lab procedures.
• Gentle bend at 23.5cm (9¼") from the base allows technician to observe the working surface while standing or from a comfortable sitting position
• Lower surface of the shield..
Brand: Bel-Art
Model: F13205-0001
This corrugated cardboard receptacle is perfect for containing biohazardous waste slated for incineration. When the box is full, pull the flap to a closed position and the entire unit can be placed in the incinerator.
• Tabs along the top edge keep a clear 0.038mm (1.5 mil) thick polypropylene bioha..
Brand: Bel-Art
Model: F18202-0000
Securely holds as many as eight chromatography columns up to 30mm (1³⁄₁₆") in diameter in or between its flexible loops.• Rigid plastic back is mounted on two polyethylene support blocks which slide over support stand rods• Tighten the screws to mount the rack at the desired height • Requires two su..
a
c
Brand: Bel-Art
Model: F13192-0001
Keep bags open and securely supported on these economical, lightweight, stainless steel wire frames. Polypropylene bottom serves as a containment tray in the event of bag leakage and is safety orange in color for easy identification as a biohazard containment system.
• Small bag holder is ideal for ..
a
c
Brand: Bel-Art
Model: F13174-1012
Disposable, white waste bags free bench or hood space when hung from walls, cabinets or virtually anywhere. • Peel backing off the adhesive strip across the top and hang close to your work area
• Back panel is longer than the front for easy opening
• High Molecular Weight High Density (HMHD) polyeth..
Brand: Bel-Art
Model: F18847-0002
Molded polystyrene container, with cover, has an internal 12-place support for 1.5 ml microcentrifuge tubes. The space surrounding the tubes is filled with a sealed-in material that maintains the low temperature required for safe storage and transport.
• Maintains a -15ºC temperature for 1½ hours w..
Brand: Bel-Art
Model: F18846-0000
Benchtop sized cooler holds twelve 0.5 or 1.5ml microcentrifuge tubes at a temperature below 0ºC for approximately 2½ hours. Ideal for protecting valuable samples stored in a freezer with defrost cycle. Use included insert to hold 0.5ml microcentrifuge tubes. Store at -20ºC for a few hours until the..
Brand: Bel-Art
Model: F18846-0010
Can be used for up to 45 minutes to rapidly and repeatedly chill biological samples for use in molecular biology. Applications such as ethanol precipitation of DNA/RNA samples are made easy, eliminating the inconvenience of traditional dry ice and alcohol baths. After storing the polycarbonate coole..
Brand: Bel-Art
Model: F18516-0000
These two tier racks support cuvettes with a minimum of physical contact, greatly reducing the chance of damage.
•Only the corners of the cuvettes touch the racks
•Accommodate 12 cuvettes of 10mm light path
•Will not scratch quartz cuvettes
•F18516-0787 features Stack Rack™ interlocking end plates f..
Brand: Bel-Art
Model: F18516-0787
These two tier racks support cuvettes with a minimum of physical contact, greatly reducing the chance of damage.
•Only the corners of the cuvettes touch the racks
•Accommodate 12 cuvettes of 10mm light path
•Will not scratch quartz cuvettes•F18516-0787 features Stack Rack™ interlocking end plates fo..
Brand: Bel-Art
Model: F13473-0000
Write-On™ Label Tape Dispensers provide a smooth writing surface, making labeling easy and fast. When marked tape is advanced and cut off on the serrated edge, a fresh length of label tape is positioned on the writing platform.
• Various width and color tape rolls can be mixed together on the spindl..
Brand: Bel-Art
Model: F13635-0014
Porous one foot polyethylene rods can withstand temperatures up to 93ºC (200ºF).
• Coarse grade porosity with an average pore size of 110 microns..
Brand: Bel-Art
Model: F13635-0012
Porous one foot polyethylene rods can withstand temperatures up to 93ºC (200ºF).
• Coarse grade porosity with an average pore size of 110 microns..
Brand: Bel-Art
Model: B61310-7200
Thermometers feature a 1/2” NPT threaded connection and polycarbonate lens**. External adjustment allows for simple field calibration. For correct temperature reading, stem must be immersed at least 50mm (2”) in liquids and 100mm in gases (4”). Each thermometer features stainless steel case and stem..
Brand: Bel-Art
Model: B60900-1600
Choose from a variety of features in these digital stem thermometers that are suitable for field studies, wet lab applications, wash down areas, food testing and tanks.
• Will read temperatures in liquids, semi-solids and gases• 3” to 7.75” probes easily reach into cuvettes, test tubes, flasks, bea..
Brand: Bel-Art
Model: B60900-2100
Choose from a variety of features in these digital stem thermometers that are suitable for field studies, wet lab applications, wash down areas, food testing and tanks. • Will read temperatures in liquids, semi-solids and gases
• 3” to 7.75” probes easily reach into cuvettes, test tubes, flasks, bea..
Brand: Bel-Art
Model: B60900-2200
Choose from a variety of features in these digital stem thermometers that are suitable for field studies, wet lab applications, wash down areas, food testing and tanks. • Will read temperatures in liquids, semi-solids and gases
• 3” to 7.75” probes easily reach into cuvettes, test tubes, flasks, bea..
Brand: Bel-Art
Model: B60900-2000
Choose from a variety of features in these digital stem thermometers that are suitable for field studies, wet lab applications, wash down areas, food testing and tanks. • Will read temperatures in liquids, semi-solids and gases
• 3” to 7.75” probes easily reach into cuvettes, test tubes, flasks, bea..