Search Criteria
Products meeting the search criteria
Brand: Bel-Art
Model: F18309-0100
Weighted holder grips beakers or flasks firmly with four flared stainless steel prongs.
• Vikem® vinyl-coated lead ring weight secured beneath holder
• Keeps container immersed in water
• Provides a low center of gravity
• Allows water to circulate underneath the beaker or flask
• Can be used in b..
Brand: Bel-Art
Model: F18309-0250
Weighted holder grips beakers or flasks firmly with four flared stainless steel prongs.
• Vikem® vinyl-coated lead ring weight secured beneath holder
• Keeps container immersed in water• Provides a low center of gravity
• Allows water to circulate underneath the beaker or flask• Can be used in boi..
Brand: Bel-Art
Model: F44542-0000
This slide holder has a sloped groove that accepts up to 10 single or double slides standing on end.
• Front ledge serves as a place to dry slides
• Made of durable polystyrene..
Brand: Bel-Art
Model: H44557-0000
With these handy files near your microscope, slides are always separated, visible and orderly.
• Vacuum-formed polystyrene 12-place slide holder
• Allows slides to project over the rack’s edge for easy handling..
Brand: Bel-Art
Model: F18228-0000
Plastic Tubing Clamps are durable and will not rust or corrode. Select from 3 sizes for best tubing fit.
• Mini Tube Clamp with single position on/off gives positive shut-off with fingertip control; use for thin-walled tubing under 4.7mm (³⁄₁₆") O.D.
• Mid-Range Tube Clamp has a 15-position step..
Brand: Bel-Art
Model: F13373-0000
Avoid fumbling and possible contamination of samples by keeping a marking pen handy and easy to uncap with only one hand.
• Ideal for use near an autoclave, incubator, centrifuge, storeroom, freezer or anywhere on the lab bench
• Adhesive backed, press-fit Dual Lock™ reclosable fastener can be atta..
Brand: Bel-Art
Model: F18202-0000
Securely holds as many as eight chromatography columns up to 30mm (1³⁄₁₆") in diameter in or between its flexible loops.• Rigid plastic back is mounted on two polyethylene support blocks which slide over support stand rods• Tighten the screws to mount the rack at the desired height • Requires two su..
a
c
Brand: Bel-Art
Model: F13192-0001
Keep bags open and securely supported on these economical, lightweight, stainless steel wire frames. Polypropylene bottom serves as a containment tray in the event of bag leakage and is safety orange in color for easy identification as a biohazard containment system.
• Small bag holder is ideal for ..
a
c
Brand: Bel-Art
Model: F13192-0002
Keep bags open and securely supported on these economical, lightweight, stainless steel wire frames. Polypropylene bottom serves as a containment tray in the event of bag leakage and is safety orange in color for easy identification as a biohazard containment system.
• Small bag holder is ideal for..
a
c
Brand: Bel-Art
Model: F13192-0003
Keep bags open and securely supported on these economical, lightweight, stainless steel wire frames. Polypropylene bottom serves as a containment tray in the event of bag leakage and is safety orange in color for easy identification as a biohazard containment system.
• Small bag holder is ideal for..
a
c
Brand: Bel-Art
Model: F13192-0102
Dishwasher and autoclave-safe, the reusable Clavies® Biohazard Bag Holder Cover opens quickly and easily by pressing the built-in release tab - no batteries required!• Orange cover fits both the Medium and Large sizes of the Clavies® Biohazard Bag Holders (F13192-0002 and F13192-0003)
• Features a s..
Brand: Bel-Art
Model: F18796-0000
The most versatile conical tube holder on the market, it sets up in just seconds to hold either a 15ml or a 50ml conical tube.• Open uprights allow you to view the entire contents of the tube; no more guessing if there is liquid remaining in the conical bottom• Tube can be easily lifted from the hol..
Brand: Bel-Art
Model: F18795-0001
Leave hands free for pipetting and other critical tasks with these polystyrene plastic tube holders that securely hold a 50ml conical centrifuge tube.
• Non-grip style (white) allows the tube to be lifted freely from holder as needed
• Grip style (blue) stays with the tube when it is lifted from th..
Brand: Bel-Art
Model: F18795-0000
Leave hands free for pipetting and other critical tasks with these polystyrene plastic tube holders that securely hold a 50ml conical centrifuge tube.
• Non-grip style (white) allows the tube to be lifted freely from holder as needed
• Grip style (blue) stays with the tube when it is lifted from th..
Brand: Bel-Art
Model: F18237-0000
Suspend dialysis bags in large beakers or pitchers up to 0.63cm (¼") thick with these strong clips.
• Bags slide easily into the slot and then the holder can be clipped onto the container’s edge
• Smooth polypropylene surface may be marked with identifying sequence numbers
Autoclavable..
Brand: Bel-Art
Model: F18954-0002
This polypropylene system is strong enough to support the weight of even the heaviest pipettor. Hold a single pipette with one clamp or add a triple clamp or extenders to increase the number of holders at a work location.
• Utility tray mounts between two clamps; ideal for storing pipetting supplie..
Brand: Bel-Art
Model: F38951-2006
These unique holders are perfect for keeping round and tapered bottom flasks upright. • Inside wall has a slight taper to the open bottom; allows a variety of flask shapes and sizes to fit into one holder
• Wide base keeps flasks stable
• Side slots can be used as sight windows
• Molded from polypro..
Brand: Bel-Art
Model: F38951-2000
These unique holders are perfect for keeping round and tapered bottom flasks upright.
• Inside wall has a slight taper to the open bottom; allows a variety of flask shapes and sizes to fit into one holder
• Wide base keeps flasks stable
• Side slots can be used as sight windows
• Molded from polypro..
Brand: Bel-Art
Model: F38951-2010
These unique holders are perfect for keeping round and tapered bottom flasks upright.
• Inside wall has a slight taper to the open bottom; allows a variety of flask shapes and sizes to fit into one holder• Wide base keeps flasks stable
• Side slots can be used as sight windows
• Molded from polypro..
Brand: Bel-Art
Model: F38951-2002
These unique holders are perfect for keeping round and tapered bottom flasks upright.
• Inside wall has a slight taper to the open bottom; allows a variety of flask shapes and sizes to fit into one holder
• Wide base keeps flasks stable
• Side slots can be used as sight windows
• Molded from polypr..