Search Criteria
Products meeting the search criteria
a
c
Brand: Bel-Art
Model: F13192-0003
Keep bags open and securely supported on these economical, lightweight, stainless steel wire frames. Polypropylene bottom serves as a containment tray in the event of bag leakage and is safety orange in color for easy identification as a biohazard containment system.
• Small bag holder is ideal for..
a
c
Brand: Bel-Art
Model: F13193-0102
Economical and convenient, this benchtop disposal system is perfect for collecting pipette tips, microcentrifuge tubes, etc. during daily use.• Rectangular steel wire frame holds a polyethylene bag 22 x 28cm (8¹/₂ x 11"); coated in easy to clean, durable, orange color epoxy
• Snug fitting polypropy..
Brand: Bel-Art
Model: H18978-0000
These epoxy coated steel wire racks hold 100mm x 20mm plastic Petri dishes and are easily loaded and emptied from the top.
• Wide front openings permit easy access but prevent dishes from sliding out
• Not suitable for glass Petri dishes
• Epoxy coated steel wire is chemical and corrosion resistant..
Brand: Bel-Art
Model: H18979-0000
These epoxy coated steel wire racks hold 100mm x 20mm plastic Petri dishes and are easily loaded and emptied from the top.
• Wide front openings permit easy access but prevent dishes from sliding out
• Not suitable for glass Petri dishes
• Epoxy coated steel wire is chemical and corrosion resistant..
Brand: Bel-Art
Model: F18979-0001
Poxygrid® 100mm Petri Dish Dispensing Racks hold 11 or 33 plastic Petri dishes (100mm x 20mm).
• Petri dishes are easily dispensed one at a time from the bottom of the stack; dishes are loaded at top of rack
• Rack tilts toward the rear for convenient presentation of dishes
• Epoxy coated steel wir..
Brand: Bel-Art
Model: F18978-0001
Poxygrid® 100mm Petri Dish Dispensing Racks hold 11 or 33 plastic Petri dishes (100mm x 20mm).
• Petri dishes are easily dispensed one at a time from the bottom of the stack; dishes are loaded at top of rack
• Rack tilts toward the rear for convenient presentation of dishes
• Epoxy coated steel wir..
Brand: Bel-Art
Model: F18979-0003
Durable blue epoxy-coated steel wire racks hold 30 or 10 contact plates with lids (72mm maximum diameter) (RODAC®, Becton Dickinson).
• Useful for transport, incubation and storage of contact plates; convenient organization
• Steam autoclavable at 121ºC (250ºF)..
Brand: Bel-Art
Model: F18979-0002
Durable blue epoxy-coated steel wire racks hold 30 or 10 contact plates with lids (72mm maximum diameter) (RODAC®, Becton Dickinson).
• Useful for transport, incubation and storage of contact plates; convenient organization
• Steam autoclavable at 121ºC (250ºF)..
Brand: Bel-Art
Model: H18962-0001
Store pipettors while protecting pipettor tips in these epoxy-coated aluminum racks that provide quick, easy access for more efficient work.
• Holds up to 10 round shape pipettors such as Finnpipette®, Socorex®, Eppendorf® and other popular brands; two end holes fit Pipette-Aid® pipette fillers• Tw..
Brand: Bel-Art
Model: F16969-0012
These racks have 12 places (3 x 4 rows) for 300ml Biological Oxygen Demand Bottles.
•Stackable for storage or refrigeration allowing 16.7cm (6⁹/₁₆") between racks
•Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F)..
a
c
Brand: Bel-Art
Model: H13187-0000
Sturdy wire holder keeps bags open while a separate hooked ring that rests over the top keeps them securely in place
• Bright biohazard orange colored epoxy-coated steel wire
• Chemical and corrosion-resistant; unaffected by organic solvents, salts, weak acids and weak alkalis
• Will withstand a tem..
a
c
Brand: Bel-Art
Model: H13188-0000
Sturdy wire holder keeps bags open while a separate hooked ring that rests over the top keeps them securely in place
• Bright biohazard orange colored epoxy-coated steel wire
• Chemical and corrosion-resistant; unaffected by organic solvents, salts, weak acids and weak alkalis
• Will withstand a tem..
a
c
Brand: Bel-Art
Model: H13189-0000
Sturdy wire holder keeps bags open while a separate hooked ring that rests over the top keeps them securely in place
• Bright biohazard orange colored epoxy-coated steel wire
• Chemical and corrosion-resistant; unaffected by organic solvents, salts, weak acids and weak alkalis
• Will withstand a tem..
Brand: Bel-Art
Model: F19856-0250
Holds large conical and round-bottom centrifuge tubes that cannot stand up by themselves (such as Falcon®, Corning®, Nunc®, and Kimble®). • Epoxy-coated steel wire rack is 10.2cm (4") high; has two levels of square grids to hold 6 tubes up to 250ml (60mm diameter)
• Heat-cured epoxy coating is unaff..
Brand: Bel-Art
Model: F19856-0500
This unique steel wire rack allows storage and transport of up to four (4) 500ml conical bottom centrifuge tubes.
• Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis
• Temperature range: -223ºC (-369ºF) to 121ºC (250ºF); autoclavable..
a
Brand: Bel-Art
Model: F18794-0001
Made of epoxy-coated steel wire, these racks hold up to thirty-six 50ml centrifuge tubes in holes 30mm square.
• Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis• Temperature range -223ºC (-369ºF) to 121ºC (250ºF); autoclavable..
Brand: Bel-Art
Model: F19858-0001
This black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack.
Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81")Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkaliTemperat..
a
Brand: Bel-Art
Model: F18794-0002
Made of epoxy-coated steel wire, these racks hold up to thirty-six 50ml centrifuge tubes in holes 30mm square.
• Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis
• Temperature range -223ºC (-369ºF) to 121ºC (250ºF); autoclavable..
a
Brand: Bel-Art
Model: F18794-0000
Made of epoxy-coated steel wire, these racks hold up to thirty-six 50ml centrifuge tubes in holes 30mm square.
• Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis
• Temperature range -223ºC (-369ºF) to 121ºC (250ºF); autoclavable..
Brand: Bel-Art
Model: F18722-0000
Epoxy-coated steel wire rack holds 15 conical bottom 15ml centrifuge tubes. Top and middle sections have 18mm square holes and are centered over rails in the base that hold the tips of the tubes.
•Generously spaced for easy handling
•Heat-cured epoxy coating is unaffected by organic solvents, salts,..