Search Criteria
Products meeting the search criteria
Brand: Bel-Art
Model: F18302-0000
Sturdy and stable support stand has a rust-proof, polycarbonate plastic base with a 46cmH x 7.9mm dia. (18 x ⁵⁄₁₆") stainless steel support rod secured to the base with two hex nuts.
• Offset rod mounts to the 20.8cm (8³⁄₁₆") diameter base, leaving area for larger vessels
• Useful temperature range..
Brand: Bel-Art
Model: H18910-0102
This black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack.
•Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81")
•Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis
•Temp..
Brand: Bel-Art
Model: H18303-0000
Excellent for use in severe corrosive conditions, this heavy-duty support stand is made of polypropylene plastic and metal, yet has no exposed metal parts.
• Measuring 21.5 x 40.5 x 5cmH (8.5 x 16 x 1¾"), the base has a smooth surface for easy cleaning and weighs 2.5kg (5½lbs) for stability
• 12.5mm..
Brand: Bel-Art
Model: F18953-0000
Sturdy polypropylene plastic rack holds 50 pipettes in a vertical 5 x 10 arrangement. Top and middle decks have 16 mm diameter holes; bottom deck holes are tapered from 16 mm to 6 mm diameter• Pipette tips will not contact table surface
• End plates have handles for easy carrying
• Steam autoclavabl..
Brand: Bel-Art
Model: H18960-0000
Horizontally holds 12 volumetric or graduated pipettes 1ml and larger.
• Polyethylene plastic support is 24.1cm x 17.8cm (9½ x 7") wide and 29.2cm (11½") high
• There is 21.3cm (8⅜") between plates with a 1.9cm (¾") diameter carrying bar at the top
• Supports pipettes longer than 22cm (8⅝")..
Brand: Bel-Art
Model: F18955-0000
Polypropylene plastic stand has a two-section top plate; one with 10 holes, 14mm in diameter, the other with 18 holes, 11mm in diameter. Holes in the lower plate are 4mm in diameter and support the tips of the pipettes as they are held in the stand. • For safe and orderly storage of up to 28 pipette..
Brand: Bel-Art
Model: H18303-0005
This non-corrosive support stand with stainless steel mounting rod provides modern advantages over metal ring stands. Compact polypropylene base has a smooth surface making cleaning easy; measures 21 x 16cm (8¼ x 6¼”) x 4.5cmH (1¾”)Provides excellent stability; can be used to support a variety of ty..
Brand: Bel-Art
Model: F18206-0000
Non-corroding clamps hold burettes firmly in place. • Soft rubber pads hold burette without scratching
• Clamp fits standard 12.5mm (½") support rod and includes an adapter to fit to narrower 9.5mm (⅜") rod (support rod not included)
• Made of chemical resistant polypropylene; autoclavable at..
Brand: Bel-Art
Model: F38994-0000
The Lattice Support Stand has an extended base and three, evenly spaced, rigid aluminum support rods to provide maximum capacity of small lightweight items such as glassware, as well as heavy items such as mechanical stirrers.
• Weighted polypropylene base is excellent for use in severe corrosive co..
Brand: Bel-Art
Model: F38950-0000
Round-bottom flasks of any size up to 10 liters are cradled securely in the stepped concentric rings of this holder.
• Can be stacked together for convenient storage• Polypropylene plastic rack; not affected by spilled acids, alkalis or other corrosive liquids
• Steam autoclavable at 121°C (250°F)..
Brand: Bel-Art
Model: H18805-0000
For drying test tubes, beakers, flasks, and other labware, this stand has rubber tipped feet for non-skid use on a tabletop, or wire loops on the back for wall mounting.• Three rows of epoxy-coated hairpin-loop supports (14 in all) hold labware with 18mm I.D. necks or larger
• Top row has 12 straigh..
Showing 1 to 11 of 11 (1 Pages)