Search Criteria
Products meeting the search criteria
Brand: Bel-Art
Model: H19716-0000
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..
Brand: Bel-Art
Model: H19715-0000
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..
Brand: Bel-Art
Model: H19717-0000
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.
• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..
Brand: Bel-Art
Model: F14681-0000
Polypropylene plastic funnels with standard taper stems.
• Steam autoclavable at 121ºC (250ºF)..
Brand: Bel-Art
Model: F14682-0000
Polypropylene plastic funnels with standard taper stems.
• Steam autoclavable at 121ºC (250ºF)..
Brand: Bel-Art
Model: F20197-1515
Use these hollow Teflon® PTFE stoppers for boiling and distilling flasks with ground joints.
• Easily removed from standard tapered glassware by turning the red extraction nut to apply a safe, gentle and even force against the mouth of the vessel• Helps eliminate accidents and breakage
• Autoclave ..
Brand: Bel-Art
Model: F20197-1530
Use these hollow Teflon® PTFE stoppers for boiling and distilling flasks with ground joints. • Easily removed from standard tapered glassware by turning the red extraction nut to apply a safe, gentle and even force against the mouth of the vessel
• Helps eliminate accidents and breakage
• Autoclave ..
Brand: Bel-Art
Model: F20320-1660
For use with 10mm stirring rods, the body is Teflon® PTFE with a Viton® O-ring.
• Comes complete with two Teflon® PTFE inserts with inside O-ring for fine adjustment of stirring rod tension
• Threaded polypropylene locking compression cap on top
• Extracting nut above the ground joint allows easy a..
Brand: Bel-Art
Model: F20311-1718
Stopper has Teflon® PTFE body with Viton® O-ring.
• Polypropylene screw cap on top has an inside O-ring for depth adjustment of glass tubing
• Bottom inner joint has a threaded extracting nut for easy removal of adapter
• Not AutoclavableTEFLON® is a registered trademark of The Chemours Company FC ..
Brand: Bel-Art
Model: F20320-1661
Stopper-Loc™ Nut allows stirrer bearing to be locked to outer ground joint when stirring viscous materials for long periods of time. _x000D_
• Complete with Stopper-Loc™ Nut and two Teflon® PTFE inserts_x000D_
• Replacement Teflon® PTFE insert with Viton® O-ring for 10mm Teflon® PTFE stirrer bearing..
Brand: Bel-Art
Model: F20320-1662
Stopper-Loc™ Nut allows stirrer bearing to be locked to outer ground joint when stirring viscous materials for long periods of time.
• Complete with Stopper-Loc™ Nut and two Teflon® PTFE inserts
• Replacement Teflon® PTFE insert with Viton® O-ring for 10mm Teflon® PTFE stirrer bearings available
• ..
Brand: Bel-Art
Model: F20309-1680
Teflon® PTFE body with Viton® O-ring for air tight vacuum work (Size 10/18 adapter does not have a body O-ring).
• Adapter has a threaded polypropylene screw cap on top with an inside O-ring for depth adjustment of 6-7mm for straight stem thermometers, glass tubing and other items
• Rotating the ex..
Brand: Bel-Art
Model: F20309-1710
Teflon® PTFE body with Viton® O-ring for air tight vacuum work (Size 10/18 adapter does not have a body O-ring).
• Adapter has a threaded polypropylene screw cap on top with an inside O-ring for depth adjustment of 6-7mm for straight stem thermometers, glass tubing and other items
• Rotating the ex..
Brand: Bel-Art
Model: F20309-1716
Teflon® PTFE body with Viton® O-ring for air tight vacuum work (Size 10/18 adapter does not have a body O-ring).
• Adapter has a threaded polypropylene screw cap on top with an inside O-ring for depth adjustment of 6-7mm for straight stem thermometers, glass tubing and other items
• Rotating the ext..
Brand: Bel-Art
Model: F37137-0000
Spinvane® Magnetic Stirring Bars half-round tapered shape is designed for conical bottom centrifuge tubes.
• Half-round shaped vane is made of solid FDA grade, USP Class VI Teflon® and has a cross-mounted, molded-in Alnico magnet
• Manufactured to fit 9.7/6.1 x 23.0 x 9.9mm tubes; can be trimmed to..
Brand: Bel-Art
Model: H36700-0000
These micro spatulas are made of stainless steel rod with flat ends coated in brown Teflon® FEP.
• Complies with FDA regulations governing direct food contact applications
• Available with straight or tapered blade
• Ends measure 7.9W x 50mmL (⁵⁄₁₆ x 2")
TEFLON® is a registered trademark of The Chem..
Brand: Bel-Art
Model: H37826-0000
A smooth, tapered, stainless sampler for extracting a “plug” of material from bags or blocks of cheese, grease, soap, clay, etc.
• Sharp end of the satin finish sampler will cut through a bag or box
• Twisting the handle one-half turn will cut out a plug of material 15.2cm (6”) long tapering from 1..
Brand: Bel-Art
Model: H50015-0000
These corrosion-proof polypropylene plastic exhaust hoods are ideal for tanks and vats.
• Draws a stream of air across the top of the tank away from the operator
• Designed to rest on the rear edge of tanks..
Showing 1 to 18 of 18 (1 Pages)