Search Criteria
Products meeting the search criteria
Brand: Bel-Art
Model: H18910-0102
This black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack.
•Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81")
•Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis
•Temp..
Brand: Bel-Art
Model: F18855-0000
These heavy-duty 3 tier test tube racks have hand grips in the end plates for easy transport.
•Stackable and compact
•Base tier has rounded wells with drain holes
•Top tier has lettered and numbered rows
•Polypropylene; steam autoclavable at 121ºC (250ºF)..
Brand: Bel-Art
Model: F18856-0000
These heavy-duty 3 tier test tube racks have hand grips in the end plates for easy transport.
•Stackable and compact
•Base tier has rounded wells with drain holes
•Top tier has lettered and numbered rows
•Polypropylene; steam autoclavable at 121ºC (250ºF)..
Brand: Bel-Art
Model: F18857-0000
These heavy-duty 3 tier test tube racks have hand grips in the end plates for easy transport.
•Stackable and compact
•Base tier has rounded wells with drain holes
•Top tier has lettered and numbered rows
•Polypropylene; steam autoclavable at 121ºC (250ºF)
•Dimensions: 21.3L x 11cmW (8³/₈ x 4⁵/₁₆")..
Brand: Bel-Art
Model: F18859-0000
These heavy-duty 3 tier test tube racks have hand grips in the end plates for easy transport.
•Stackable and compact
•Base tier has rounded wells with drain holes
•Top tier has lettered and numbered rows
•Polypropylene; steam autoclavable at 121ºC (250ºF)..
a
Brand: Bel-Art
Model: F18745-0099
Round holes with tight tolerances hold 13mm tubes firmly for accurate processing reducing lost samples and potential damage to instruments. Increased efficiency is achieved by using the numbered locations for programming, resulting in higher throughput.
Designed for automated liquid handling systems..
a
Brand: Bel-Art
Model: F18745-0023
Round holes with tight tolerances hold 13mm tubes firmly for accurate processing reducing lost samples and potential damage to instruments. Increased efficiency is achieved by using the numbered locations for programming, resulting in higher throughput.
▪Designed for automated liquid handling syste..
Brand: Bel-Art
Model: F18841-0000
These polypropylene test tube racks stack to conserve space, even when filled with tubes.
•Holds 72 micro sample tubes in 6 x 12 rows
•Steam autoclavable at 121ºC (250ºF)..
Brand: Bel-Art
Model: F18743-1016
These No-Wire™ racks fit neatly into round containers such as ice buckets and beakers, as well as desiccators. Choose from two sizes; the large rack is ideal for use in round ice buckets such as Magic Touch™ and the small rack fits perfectly in a 1000ml beaker.
•Special blend of autoclavable polypro..
Brand: Bel-Art
Model: F18741-0020
These No-Wire™ racks fit neatly into round containers such as ice buckets and beakers, as well as desiccators. Choose from two sizes; the large rack is ideal for use in round ice buckets such as Magic Touch™ and the small rack fits perfectly in a 1000ml beaker.
•Special blend of autoclavable polypro..
Brand: Bel-Art
Model: F18743-1020
These No-Wire™ racks fit neatly into round containers such as ice buckets and beakers, as well as desiccators. Choose from two sizes; the large rack is ideal for use in round ice buckets such as Magic Touch™ and the small rack fits perfectly in a 1000ml beaker.
•Special blend of autoclavable polypro..
Brand: Bel-Art
Model: F18749-0000
Retainer fingers hold tubes firmly in the rack plates with no fear of dislodging, making them perfect for both decanting and water bath work.
▪Fingers allow simultaneous decanting to save valuable time
▪Specially formulized plastic allows the rack to submerge in water baths ▪Fingers secure tubes w..
Brand: Bel-Art
Model: F18749-0001
Retainer fingers hold tubes firmly in the rack plates with no fear of dislodging, making them perfect for both decanting and water bath work.
▪Fingers allow simultaneous decanting to save valuable time
▪Specially formulized plastic allows the rack to submerge in water baths
▪Fingers secure tubes ..
Brand: Bel-Art
Model: F18749-0002
Retainer fingers hold tubes firmly in the rack plates with no fear of dislodging, making them perfect for both decanting and water bath work.
▪Fingers allow simultaneous decanting to save valuable time
▪Specially formulized plastic allows the rack to submerge in water baths
▪Fingers secure tubes ..
a
Brand: Bel-Art
Model: F18748-0013
Compact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods.
▪Available in 5 grid sizes to accommodate the full range of laboratory test tubes
▪Steam autoclavable at 121ºC (250ºF)
▪Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")..
Brand: Bel-Art_Special Deal
Model: F18748-0013
Compact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods.
▪Available in 5 grid sizes to accommodate the full range of laboratory test tubes
▪Steam autoclavable at 121ºC (250ºF)
▪Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")..
a
Brand: Bel-Art
Model: F18748-0016
Compact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods.
▪Available in 5 grid sizes to accommodate the full range of laboratory test tubes
▪Steam autoclavable at 121ºC (250ºF)
▪Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")..
Brand: Bel-Art_Special Deal
Model: F18748-0016
Compact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods.
▪Available in 5 grid sizes to accommodate the full range of laboratory test tubes
▪Steam autoclavable at 121ºC (250ºF)
▪Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")..
a
Brand: Bel-Art
Model: F18748-0020
Compact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods.
▪Available in 5 grid sizes to accommodate the full range of laboratory test tubes
▪Steam autoclavable at 121ºC (250ºF)
▪Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")..
Brand: Bel-Art_Special Deal
Model: F18748-0020
Compact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods.
▪Available in 5 grid sizes to accommodate the full range of laboratory test tubes
▪Steam autoclavable at 121ºC (250ºF)
▪Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")..