Brand: Bel-Art
Model: F18796-0000
The most versatile conical tube holder on the market, it sets up in just seconds to hold either a 15ml or a 50ml conical tube.• Open uprights allow you to view the entire contents of the tube; no more guessing if there is liquid remaining in the conical bottom• Tube can be easily lifted from the hol..
Brand: Bel-Art
Model: F18795-0001
Leave hands free for pipetting and other critical tasks with these polystyrene plastic tube holders that securely hold a 50ml conical centrifuge tube.
• Non-grip style (white) allows the tube to be lifted freely from holder as needed
• Grip style (blue) stays with the tube when it is lifted from th..
Brand: Bel-Art
Model: F18795-0000
Leave hands free for pipetting and other critical tasks with these polystyrene plastic tube holders that securely hold a 50ml conical centrifuge tube.
• Non-grip style (white) allows the tube to be lifted freely from holder as needed
• Grip style (blue) stays with the tube when it is lifted from th..
Brand: Bel-Art
Model: F18905-0001
This tray with rack insert can accommodate up to fifty 1.5ml tubes (or other tubes with a diameter less than 12mm) for large volume benchtop processing. To further protect tubes during transport or storage while also maintaining stackability, an optional polypropylene cover is available.• Deep tray ..
Brand: Bel-Art
Model: F19856-0250
Holds large conical and round-bottom centrifuge tubes that cannot stand up by themselves (such as Falcon®, Corning®, Nunc®, and Kimble®). • Epoxy-coated steel wire rack is 10.2cm (4") high; has two levels of square grids to hold 6 tubes up to 250ml (60mm diameter)
• Heat-cured epoxy coating is unaff..
Brand: Bel-Art
Model: F19856-0500
This unique steel wire rack allows storage and transport of up to four (4) 500ml conical bottom centrifuge tubes.
• Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis
• Temperature range: -223ºC (-369ºF) to 121ºC (250ºF); autoclavable..
a
Brand: Bel-Art
Model: F18794-0001
Made of epoxy-coated steel wire, these racks hold up to thirty-six 50ml centrifuge tubes in holes 30mm square.
• Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis• Temperature range -223ºC (-369ºF) to 121ºC (250ºF); autoclavable..
Brand: Bel-Art
Model: F19858-0001
This black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack.
Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81")Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkaliTemperat..
a
Brand: Bel-Art
Model: F18794-0002
Made of epoxy-coated steel wire, these racks hold up to thirty-six 50ml centrifuge tubes in holes 30mm square.
• Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis
• Temperature range -223ºC (-369ºF) to 121ºC (250ºF); autoclavable..
Brand: Bel-Art
Model: F16964-0006
Bel-Art Poxygrid Hybridization Bottle Rack for 40mm Diameter Bottles; 6 Places, 5⅜ x 7¹³⁄₁₆ x 5⅛ in.
Heavy-duty rack protects your expensive bottles keeping them from rolling, tipping and striking against one another. Holds 150mm and 300mm long bottles with ample space in between to allow for the screw cap diameter and provide convenient handling.
• Epoxy-coated steel rods provide durability and e..
a
Brand: Bel-Art
Model: F18794-0003
Epoxy coated steel wire holder is chemical and corrosion resistant.
• Supports a single 50ml conical tube at bottom and half height locations
• Durable and economical
• Autoclavable..
Brand: Bel-Art
Model: F18742-0121
Unique tabs protect your samples from loss and contamination. Place tubes in slots and slide under the tabs to keep tubes in place and caps closed when under pressure, floating or submerged. For use in water baths, ice or on the benchtop.• Immobilizing tabs prevent tube tops from popping open during..
Brand: Bel-Art
Model: F18875-1600
Made especially for use with beakers and waterbaths, these space-saving racks are ideal for small quantities of tubes and perfect for use in microbiology and immunology labs. They are molded of buoyant TPX® brand polymethylpentene with tiny bubbles throughout for additional buoyancy. Insert tubes fr..
Showing 1 to 13 of 13 (1 Pages)