Smooth surface stirbars have no sharp or flat edges which maximizes contact with the stirring vessel.
• Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® brand PTFE Coating – Superior Chemical Compatibility
• Manufactured in a registered ISO 9001:2015 facility, as verified by SGS certifi..
This compact, small-footprint stirrer only uses 3 to 8 psi (21-55kPa) air pressure and is ideal for stirring vessels up to 1 liter.
• Tubing is supplied to connect to an air supply
• All parts are made from high impact polystyrene; ensures long life and easy clean-up in case of spills
• Can be used..
Circulus™ Magnetic Stirring Bars offer fast mixing action and strong turbulence as well as greater stability with less drifting at higher speeds.
• Ideal for containers with round or convex bottoms
• All sizes have solid FDA grade, USP Class VI Teflon® PTFE end disks 20mm (0.79") in diameter, a bar..
Circulus™ Magnetic Stirring Bars offer fast mixing action and strong turbulence as well as greater stability with less drifting at higher speeds.
• Ideal for containers with round or convex bottoms
• All sizes have solid FDA grade, USP Class VI Teflon® PTFE end disks 20mm (0.79") in diameter, a bar..
Used in conjunction with a magnetic stirring plate, Spinbar® stir bars enable uniform, consistent, and thorough mixing of chemical solutions. Multi-faceted shape provides greater surface area and added turbulence for more vigorous, thorough mixing when compared to the smooth surface of cylindrical b..
The Cool Stir® Large Volume Magnetic Stirrer efficiently stirs fluid volumes from 10 liters up to 208 liters (2.5 to 55 gallons). Stirring speed is continuously changeable to around 600 rpm (maximum operational rpm depends on volume and density) delivering torque for mixing through powerful agitatio..
Double Spinfin® Magnetic Stirring Bars agitate liquids in round bottom vessels such as test tubes, cylinders and flasks, where other stirring bars cannot be used.
• Fins on top and bottom ensure complete agitation
• Maintains its position in a vessel and will not wobble
• Alnico magnet encapsulated..
Double Spinfin® Magnetic Stirring Bars agitate liquids in round bottom vessels such as test tubes, cylinders and flasks, where other stirring bars cannot be used.
• Fins on top and bottom ensure complete agitation
• Maintains its position in a vessel and will not wobble
• Alnico magnet encapsulated..
Double Spinfin® Magnetic Stirring Bars agitate liquids in round bottom vessels such as test tubes, cylinders and flasks, where other stirring bars cannot be used.
• Fins on top and bottom ensure complete agitation
• Maintains its position in a vessel and will not wobble
• Alnico magnet encapsulated..
This flexible PTFE magnetic retriever will remove the largest magnetic stirring bars from deep vessels.
• Easy grip “T” handle has overall length of 65cm (26”)
• Powerful Alnico 5 magnetic end; 10.2 x 1cm diameter (4 x ⅜")
• Longer, custom lengths are available..
Ideal for field use, inside incubators or anywhere else electricity is not convenient or simply not available. CE marked.
• Speed control knob for operation up to 900 RPM
• Can mix up to 1 liter using stirring bars up to 2.54cm (1”) in length
• Two “D” batteries (not included) provide approximately ..
The Magnetic Stirring Bar Arrester holds your stirring bar in place when pouring from a beaker or flask by placing the arrester against the bottom of the container.
• 9.5mm (⅜") thick polyethylene
• 51mm (2") diameter with a radial magnet
• Other sizes can be made to order..
This retriever is able to remove a magnetic stirring bar without coming into contact with the contents of the vessel. The retriever is held in contact with the vessel where the magnetic stirring bar rests. It is then moved upward with the stirring bar following the inside of the vessel to a point wh..
Smooth surface stirbars have no sharp or flat edges which maximizes contact with the stirring vessel.
• Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® brand PTFE Coating – Superior Chemical Compatibility
• Manufactured in a registered ISO 9001:2015 facility, as verified by SGS certifi..
Pyrex® Spinbar® glass encapsulated Alnico magnet stirring bars are useful for high temperature applications up to 274˚C (525˚F).
• Completely smooth surface offers “zero absorption”; easy to clean
• Meets US Pharmacopoeia specifications for Type I Borosilicate glass
• Manufactured in a registered ..
Pyrex® Spinbar® glass encapsulated Alnico magnet stirring bars are useful for high temperature applications up to 274˚C (525˚F).
• Completely smooth surface offers “zero absorption”; easy to clean
• Meets US Pharmacopoeia specifications for Type I Borosilicate glass
• Manufactured in a registered ..
Pyrex® Spinbar® glass encapsulated Alnico magnet stirring bars are useful for high temperature applications up to 274˚C (525˚F).
• Completely smooth surface offers “zero absorption”; easy to clean
• Meets US Pharmacopoeia specifications for Type I Borosilicate glass
• Manufactured in a registered ..
Pyrex® Spinbar® glass encapsulated Alnico magnet stirring bars are useful for high temperature applications up to 274˚C (525˚F).
• Completely smooth surface offers “zero absorption”; easy to clean
• Meets US Pharmacopoeia specifications for Type I Borosilicate glass
• Manufactured in a registered ..
Many magnetic stirring bars can be impeded by powders in a liquid, but the Saturn Spinbar® Magnetic Stirring Bar rises to this stirring challenge.
• Large sphere at the bar’s center lifts the stirring bar ends while spinning
• Reduced surface contact area allows the bar to spin with decreased drag
..
Used in conjunction with a magnetic stirring plate, Spinbar® stir bars create uniform, consistent, and thorough mixing of chemical solutions.
• Contoured egg shape is ideal for use in round-bottom vessels/flasks; ensures complete mixing
• Offers minimal contact when used in plastic containers; minim..