Economy Tube Washers/Cleaners for NMR and EPR Sample Tubes
After fitting the washer to a filter flask, an inverted sample tube is inserted into the washer and solvent is introduced into the reservoir using a series of wash bottles.
You can perform numerous wash steps and finish by pulling air throug..
Quick Pressure Valve (QPV) 5 mm OD NMR Sample Tubes
Wilmad Quick Pressure Valve Sample Tubes are specially designed to simplify the work of NMR/EPR studies for catalysis, gas-liquid phase reactions, air sensitive samples and elevated temperature studies using low boiling point solvents. Due to the ..
Economy Tube Washers/Cleaners for NMR and EPR Sample Tubes
After fitting the washer to a filter flask, an inverted sample tube is inserted into the washer and solvent is introduced into the reservoir using a series of wash bottles.
You can perform numerous wash steps and finish by pulling air throug..
NMR Tube – 5mm OD
• Wilmad-LabGlass’s NMR Precision Tubes are manufactured from borosilicate glass that meets the requirement of Type 1 Class A glass from ASTM E438.
• Precision Tube has 3 fold less paramagnetic contamination comparing to the Economy tube, and can be operated safely at temperature..
Economy Tube Washers/Cleaners for NMR and EPR Sample Tubes
After fitting the washer to a filter flask, an inverted sample tube is inserted into the washer and solvent is introduced into the reservoir using a series of wash bottles.
You can perform numerous wash steps and finish by pulling air throug..
NMR Tube – 5mm OD
• Wilmad-LabGlass’s NMR Precision Tubes are manufactured from borosilicate glass that meets the requirement of Type 1 Class A glass from ASTM E438.
• Precision Tube has 3 fold less paramagnetic contamination comparing to the Economy tube, and can be operated safely at temperature..
Multi-Tube Jet Solvent NMR/EPR Tube Washer/Dryer (2nd Generation)
Wilmad’s 2nd generation Multi-Tube Jet Solvent Washer/Dryer is recommended for research labs that routinely clean NMR and EPR tubes; a single unit can accommodate up to 5 tubes (3, 4 and 5 mm OD) at once.
When an inverted tube is ins..
NMR Tube – 5mm OD
• Wilmad-LabGlass’s NMR Precision Tubes are manufactured from borosilicate glass that meets the requirement of Type 1 Class A glass from ASTM E438.
• Precision Tube has 3 fold less paramagnetic contamination comparing to the Economy tube, and can be operated safely at temperature..
Multi-Tube Jet Solvent NMR/EPR Tube Washer/Dryer (2nd Generation)
Wilmad’s 2nd generation Multi-Tube Jet Solvent Washer/Dryer is recommended for research labs that routinely clean NMR and EPR tubes; a single unit can accommodate up to 5 tubes (3, 4 and 5 mm OD) at once.
When an inverted tube is ins..
NMR Tube – 5mm OD
• Wilmad-LabGlass’s NMR Precision Tubes are manufactured from borosilicate glass that meets the requirement of Type 1 Class A glass from ASTM E438.
• Precision Tube has 3 fold less paramagnetic contamination comparing to the Economy tube, and can be operated safely at temperature..
Multi-Tube Jet Solvent NMR/EPR Tube Washer/Dryer (2nd Generation)
Wilmad’s 2nd generation Multi-Tube Jet Solvent Washer/Dryer is recommended for research labs that routinely clean NMR and EPR tubes; a single unit can accommodate up to 5 tubes (3, 4 and 5 mm OD) at once.
When an inverted tube is ins..
NMR Tube – 5mm OD
• Wilmad-LabGlass’s NMR Precision Tubes are manufactured from borosilicate glass that meets the requirement of Type 1 Class A glass from ASTM E438.
• Precision Tube has 3 fold less paramagnetic contamination comparing to the Economy tube, and can be operated safely at temperature..
NMR/EPR Tube Caps – PTFE
Our PTFE NMR/EPR Tube Caps are machined to exact specifications with smaller gyroradius and more homogeneous mass distribution than disposable caps providing better spinning stability.
They are recommended for experiments at high – ultra high field and those using Chloroform..
Low Pressure/Vacuum (LPV) Tube with Controlled Length for Automatic Sampler
Try our family of novel low pressure/vacuum tubes for NMR and EPR experiments as an alternative to other similar tubes.
A 4X larger sealing surface eliminates leaks and greatly increases its lifetime when compared to tradi..
NMR/EPR Tube Caps – PTFE
Our PTFE NMR/EPR Tube Caps are machined to exact specifications with smaller gyroradius and more homogeneous mass distribution than disposable caps providing better spinning stability.
They are recommended for experiments at high – ultra high field and those using Chloroform..
Low Pressure/Vacuum (LPV) 5 mm OD NMR Tube
Try our family of novel low pressure/vacuum tubes for NMR and EPR experiments as an alternative to other similar tubes.
A 4X larger sealing surface eliminates leaks and greatly increases its lifetime when compared to traditional gas-tight tubes. It contin..
NMR/EPR Tube Caps – PTFE
Our PTFE NMR/EPR Tube Caps are machined to exact specifications with smaller gyroradius and more homogeneous mass distribution than disposable caps providing better spinning stability.
They are recommended for experiments at high – ultra high field and those using Chloroform..
Low Pressure/Vacuum (LPV) 5 mm OD NMR Tube
Try our family of novel low pressure/vacuum tubes for NMR and EPR experiments as an alternative to other similar tubes.
A 4X larger sealing surface eliminates leaks and greatly increases its lifetime when compared to traditional gas-tight tubes. It contin..
NMR/EPR Tube Caps – PTFE
Our PTFE NMR/EPR Tube Caps are machined to exact specifications with smaller gyroradius and more homogeneous mass distribution than disposable caps providing better spinning stability.
They are recommended for experiments at high – ultra high field and those using Chloroform..