Plastic Tubing Clamps are durable and will not rust or corrode. Select from 3 sizes for best tubing fit.
• Mini Tube Clamp with single position on/off gives positive shut-off with fingertip control; use for thin-walled tubing under 4.7mm (³⁄₁₆") O.D.
• Mid-Range Tube Clamp has a 15-position steppe..
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..
Soft, pliant, all-cotton terry cloth gloves are superb for handling hot objects out of the autoclave or oven, or for other heat protection in the lab, school or industry. Note: Gloves are not waterproof and should not be used to handle dry ice. CE marked.
• Heat-resistant up to 232°C (450°F); replac..
A highly visible, nylon indicator ball housed in clear polycarbonate rotates in a circular channel during flow for simple flow monitoring.
•Continuity and relative flow rate indicated by speed of ball’s rotation
•Arrow shows direction of flow
•A minimum water flow rate of 100/ml per minute in a hori..
Protective Labeling System provides labels that stand up to harsh laboratory conditions. The clear tape protects labels from the freezer, autoclave, acids, alkalis and organic solvents. Test results prove the tape remains securely affixed with no discoloration after being autoclaved for 40 minutes a..
The exceptionally fine tips of these forceps are coated with brown Fluo-Kem® Teflon® FEP.
• Complies with FDA regulations covering direct contact with food.
• Serrated, curved tips
TEFLON® is a registered trademark of The Chemours Company FC LLC and used under license by Bel-Art Products, Inc...
Convenient, easy-to-handle cartridges with Natrasorb® TI indicating silica gel beads fit Scienceware® “Space Saver” Desiccators in addition to other plastic desiccators of similar size.
• Beads change color from blue when dry to pink when moist
• Contained in a durable, polyester felt bag with a per..
Plastic Tubing Clamps are durable and will not rust or corrode. Select from 3 sizes for best tubing fit.
• Mini Tube Clamp with single position on/off gives positive shut-off with fingertip control; use for thin-walled tubing under 4.7mm (³⁄₁₆") O.D. • Mid-Range Tube Clamp has a 15-position stepped ..
Full range of sizes fit tubing from 3 to 12mm (⅛ to ½") I.D and can be combined to make reducing combinations.
• Consists of two barbed polyethylene plastic connectors which assemble tightly together with a male-female center taper.
• Very useful in connecting and disconnecting vacuum lines and ot..
Full range of sizes fit tubing from 3 to 12mm (⅛ to ½") I.D and can be combined to make reducing combinations.
• Consists of two barbed polyethylene plastic connectors which assemble tightly together with a male-female center taper.
• Very useful in connecting and disconnecting vacuum lines and ot..
Side opening tube clamp permits installation onto tubing without disconnecting from apparatus or interrupting operation.
• Constructed of durable nylon for long life and good chemical resistance
• Accepts any tubing up to 6.4mm (1/4") O.D..
Tube clamp is molded of strong, durable plastic with serrated jaws 2.7cm (1¹⁄₁₆") long. Attach at any point on tubing without disconnecting tubing.• Operate with one hand; locks closed and opens when the locking tab is released
• Fits tubing up to 1.3cm (½") O.D.; wall thickness of 0.82mm (1/32") or..
Polypropylene plastic stopcock body has Teflon® PTFE plug, washer and bright red handle.
• Plug is 3 way for vacuum draw, shut-off and vacuum release• Taper fits on desiccator port
• Use on Desiccator Models: F42010, F42012, F42020, F42022, F42025, F42027, F41099, F42029 and F42043
TEFLON® is a reg..
Polypropylene tissue grinder efficiently homogenizes tissue and cells in microcentrifuge, centrifuge and grinding tubes. • Cone tip tapers from 8.2mm (0.33") down to 2.9mm (0.12") in a length of 19.8mm (0.78") and has a rounded end
• Overall length: 21cm (8¼")
• Shaft diameter: 4.7mm (³⁄₁₆")
• Steam..
Molded clear polystyrene body with smooth connecting barbs allow easy installation of these flow meters. • Internal flow channel diameter: 5mm• Paddle wheel shell: 25mm
• Overall length: 51mm• Maximum recommended pressure: 10 p.s.i.g.• Minimum flow: 0.5 LPM / Maximum flow: 10 LPM
• Not for use with ..
Sample liquids quickly and easily - simply squeeze the bulb, submerse the syringe in liquid, and then release the bulb to draw liquids into the syringe.
• Can be inverted to contain liquid in the graduated bulb
• Low-density polyethylene squeeze bulb; graduated in 5ml increments with 100ml maximum ..
Offers on/off and fine control so accurate that it replaces stopcocks in many applications. • Can be installed without disconnecting tubing or interrupting operation
• Accepts flexible tubing up to 14mm (½") O.D• Molded of Acetal plastic; autoclavable• Resistant to acids, alkalis and organic solvent..
Tefzel® Fluorocarbon plastic forceps have smooth square tips 1.6mm (¹/₁₆") wide.
• Excellent for handling small balance weights
• Will withstand temperature up to 199ºC (390ºF); autoclavable
• Individually blister packed..