Weighted holder grips beakers or flasks firmly with four flared stainless steel prongs.
• Vikem® vinyl-coated lead ring weight secured beneath holder
• Keeps container immersed in water
• Provides a low center of gravity
• Allows water to circulate underneath the beaker or flask
• Can be used in b..
Weighted holder grips beakers or flasks firmly with four flared stainless steel prongs.
• Vikem® vinyl-coated lead ring weight secured beneath holder
• Keeps container immersed in water• Provides a low center of gravity
• Allows water to circulate underneath the beaker or flask• Can be used in boi..
Plastic Tubing Clamps are durable and will not rust or corrode. Select from 3 sizes for best tubing fit.
• Mini Tube Clamp with single position on/off gives positive shut-off with fingertip control; use for thin-walled tubing under 4.7mm (³⁄₁₆") O.D.
• Mid-Range Tube Clamp has a 15-position steppe..
Securely holds as many as eight chromatography columns up to 30mm (1³⁄₁₆") in diameter in or between its flexible loops.• Rigid plastic back is mounted on two polyethylene support blocks which slide over support stand rods• Tighten the screws to mount the rack at the desired height • Requires two su..
Suspend dialysis bags in large beakers or pitchers up to 0.63cm (¼") thick with these strong clips.
• Bags slide easily into the slot and then the holder can be clipped onto the container’s edge
• Smooth polypropylene surface may be marked with identifying sequence numbers
Autoclavable..
Sturdy and stable support stand has a rust-proof, polycarbonate plastic base with a 46cmH x 7.9mm dia. (18 x ⁵⁄₁₆") stainless steel support rod secured to the base with two hex nuts.
• Offset rod mounts to the 20.8cm (8³⁄₁₆") diameter base, leaving area for larger vessels
• Useful temperature range..
Griffin low form polypropylene beakers are steam autoclavable at 121ºC (250ºF) and microwavable.• Raised numeric graduations show approximate volume (± 5%)
• Stack without sticking together
• Translucent• Chemical resistant..
Griffin low form polypropylene beakers are steam autoclavable at 121ºC (250ºF) and microwavable.
• Raised numeric graduations show approximate volume (± 5%)
• Stack without sticking together
• Translucent
• Chemical resistant..
Griffin low form polypropylene beakers are steam autoclavable at 121ºC (250ºF) and microwavable.
• Raised numeric graduations show approximate volume (± 5%)
• Stack without sticking together
• Translucent
• Chemical resistant..
Griffin low form polypropylene beakers are steam autoclavable at 121ºC (250ºF) and microwavable.
• Raised numeric graduations show approximate volume (± 5%)• Stack without sticking together
• Translucent
• Chemical resistant..
Griffin low form polypropylene beakers are steam autoclavable at 121ºC (250ºF) and microwavable.• Raised numeric graduations show approximate volume (± 5%)
• Stack without sticking together
• Translucent
• Chemical resistant..
Griffin low form polypropylene beakers are steam autoclavable at 121ºC (250ºF) and microwavable.
• Raised numeric graduations show approximate volume (± 5%)
• Stack without sticking together
• Translucent
• Chemical resistant..
Griffin low form polypropylene beakers are steam autoclavable at 121ºC (250ºF) and microwavable.
• Raised numeric graduations show approximate volume (± 5%)• Stack without sticking together
• Translucent
• Chemical resistant..
Easy-to-use, polypropylene clips hold thermometers and probes from 3.2 to 11mm (1/8 to 7/16”) in diameter securely in place.
• Fits onto the rims of beakers or pitchers up to ¼” thick
• Autoclavable at 121°C (250°F)..
Non-corroding clamps hold burettes firmly in place. • Soft rubber pads hold burette without scratching
• Clamp fits standard 12.5mm (½") support rod and includes an adapter to fit to narrower 9.5mm (⅜") rod (support rod not included)
• Made of chemical resistant polypropylene; autoclavable at..
Non-corroding clamps hold burettes firmly in place.
• Soft rubber pads hold burette without scratching
• Clamp fits standard 12.5mm (½") support rod and includes an adapter to fit to narrower 9.5mm (⅜") rod (support rod not included)
• Made of chemical resistant polypropylene; autoclavable at 121°..
Unique tabs protect your samples from loss and contamination. Place tubes in slots and slide under the tabs to keep tubes in place and caps closed when under pressure, floating or submerged. For use in water baths, ice or on the benchtop.• Immobilizing tabs prevent tube tops from popping open during..
Made especially for use with beakers and waterbaths, these space-saving racks are ideal for small quantities of tubes and perfect for use in microbiology and immunology labs. They are molded of buoyant TPX® brand polymethylpentene with tiny bubbles throughout for additional buoyancy. Insert tubes fr..
Molded of steam autoclavable polypropylene, these racks fit 400ml or 1000ml beakers. Choose from 8 or 20 place racks with 10.8mm holes for 1.5ml microtubes.
•Tubes remain completely immersed in a beaker while tops rest above the rack
•Unload by lightly pressing down against the bench until the legs ..
Molded of steam autoclavable polypropylene, these racks fit 400ml or 1000ml beakers. Choose from 8 or 20 place racks with 10.8mm holes for 1.5ml microtubes.
•Tubes remain completely immersed in a beaker while tops rest above the rack
•Unload by lightly pressing down against the bench until the legs ..