Double-sided, compact polypropylene rack is perfect for use on the benchtop or in the freezer. One side accommodates 0.5ml microcentrifuge tubes while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 96 wells on each side keep tubes upright in an 8 x 12 array.
•Fourteen rack colors assi..
Double-sided, compact polypropylene rack is perfect for use on the benchtop or in the freezer. One side accommodates 0.5ml microcentrifuge tubes while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 96 wells on each side keep tubes upright in an 8 x 12 array.
•Fourteen rack colors assi..
Double-sided, compact polypropylene rack is perfect for use on the benchtop or in the freezer. One side accommodates 0.5ml microcentrifuge tubes while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 96 wells on each side keep tubes upright in an 8 x 12 array.
•Fourteen rack colors assi..
This two-tier polypropylene rack holds twenty 1.5ml microcentrifuge tubes in numbered wells.•Tubes are held with roughly 25mm (1") protruding above the rack surface for easy handling
•Steam autoclavable at 121ºC (250ºF)..
These white polypropylene racks are available in 2 popular grid sizes.
•Open sides make them adaptable for use in a tray of crushed ice
•Dimensions: 12.8 x 10.5 x 4.3cmH (5¼ x 4⅛ x 1¾")
•Steam autoclavable at 121ºC (250ºF)..
These micro sample tubes have a captive plug and will withstand the forces of a microcentrifuge. • Polypropylene
• Steam autoclavable at 121ºC (250ºF)..
This all-polypropylene rack provides efficient and extended cooling of twenty-eight 50ml centrifuge tubes in a chilled bath. An optional polypropylene cover is available to protect tubes during transport or storage while maintaining stackability.
• Holds approximately 2 liters (67 ounces) of ice and..
Securely holds 1.5ml microcentrifuge tubes in an 8 or 20 capacity disk for simultaneous vortexing.
• Tube contents are mixed by holding the shaft against the rubber pad of a vortexer
• Made of polypropylene with a 16.5cm (6½") long Delrin® shaft and 2.54cm (1") diameter ball handle..
Securely holds 1.5ml microcentrifuge tubes in an 8 or 20 capacity disk for simultaneous vortexing.
• Tube contents are mixed by holding the shaft against the rubber pad of a vortexer
• Made of polypropylene with a 16.5cm (6½") long Delrin® shaft and 2.54cm (1") diameter ball handle..
Holds large conical and round-bottom centrifuge tubes that cannot stand up by themselves (such as Falcon®, Corning®, Nunc®, and Kimble®). • Epoxy-coated steel wire rack is 10.2cm (4") high; has two levels of square grids to hold 6 tubes up to 250ml (60mm diameter)
• Heat-cured epoxy coating is unaff..
This unique steel wire rack allows storage and transport of up to four (4) 500ml conical bottom centrifuge tubes.
• Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis
• Temperature range: -223ºC (-369ºF) to 121ºC (250ºF); autoclavable..
Made of epoxy-coated steel wire, these racks hold up to thirty-six 50ml centrifuge tubes in holes 30mm square.
• Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis• Temperature range -223ºC (-369ºF) to 121ºC (250ºF); autoclavable..
This black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack.
Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81")Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkaliTemperat..
Made of epoxy-coated steel wire, these racks hold up to thirty-six 50ml centrifuge tubes in holes 30mm square.
• Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis
• Temperature range -223ºC (-369ºF) to 121ºC (250ºF); autoclavable..
Made of epoxy-coated steel wire, these racks hold up to thirty-six 50ml centrifuge tubes in holes 30mm square.
• Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis
• Temperature range -223ºC (-369ºF) to 121ºC (250ºF); autoclavable..
Protect your samples from loss and contamination. Hold 1.5ml or 2.0ml microcentrifuge tubes securely in a water bath, in an ice bucket, or on the benchtop.
• Immobilizing tabs allow tubes to be stored securely; ensures that the caps stay locked in place even if tipped over• 28 numbered locations fo..
Unique tabs protect your samples from loss and contamination. Place tubes in slots and slide under the tabs to keep tubes in place and caps closed when under pressure, floating or submerged. For use in water baths, ice or on the benchtop.
• Immobilizing tabs prevent tube tops from popping open durin..
Unique tabs protect your samples from loss and contamination. Place tubes in slots and slide under the tabs to keep tubes in place and caps closed when under pressure, floating or submerged. For use in water baths, ice or on the benchtop.• Immobilizing tabs prevent tube tops from popping open during..
Unique tabs protect your samples from loss and contamination. Place tubes in slots and slide under the tabs to keep tubes in place and caps closed when under pressure, floating or submerged. For use in water baths, ice or on the benchtop.• Immobilizing tabs prevent tube tops from popping open during..
Unique tabs protect your samples from loss and contamination. Place tubes in slots and slide under the tabs to keep tubes in place and caps closed when under pressure, floating or submerged. For use in water baths, ice or on the benchtop.
• Immobilizing tabs prevent tube tops from popping open durin..